25
2501.00.0000 Salt (including table salt and denatured salt) and
pure sodium chloride, whether or not in aqueous
solution or containing added anticracking or free-
flowing agents; sea water ............................. t
2502.00.0000 Unroasted iron pyrites................................. t
2503 Sulfur of all kinds, other than sublimed sulfur,
precipitated sulfur and colloidal sulfur:
2503.10.0000 Crude or unrefined sulfur........................... t
2503.90.0000 Other............................................... t
2504 Natural graphite:
2504.10.0000 In powder or in flakes.............................. kg
2504.90.0000 Other............................................... kg
2505 Natural sands of all kinds, whether or not colored,
other than metal-bearing sands of chapter 26:
2505.10.0000 Silica sands and quartz sands....................... t
2505.90.0000 Other............................................... t
2506 Quartz (other than natural sands); quartzite, whether
or not roughly trimmed or merely cut, by sawing or
otherwise, into blocks or slabs of a rectangular
(including square) shape:
2506.10.0000 Quartz.............................................. t
Quartzite:
2506.21.0000 Crude or roughly trimmed......................... t
2506.29.0000 Other............................................ t
2507.00.0000 Kaolin and other kaolinic clays, whether or not
calcined............................................... t
2508 Other clays (not including expanded clays of heading
6806), andalusite, kyanite and sillimanite, whether or
not calcined; mullite; chamotte or dinas earths:
2508.10.0000 Bentonite........................................... t
2508.20.0000 Decolorizing earths and fuller's earth.............. t
2508.30.0000 Fire-clay........................................... t
2508.40 Other clays:
2508.40.0010 Common blue clay and other ball clays............ t
2508.40.0050 Other............................................ t
2508.50.0000 Andalusite, kyanite and sillimanite................. t
2508.60.0000 Mullite............................................. t
2508.70.0000 Chamotte or dinas earths............................ t
2509.00.0000 Chalk.................................................. kg
2510 Natural calcium phosphates, natural aluminum calcium
phosphates and phosphatic chalk:
2510.10.0000 Unground............................................ t
2510.20.0000 Ground.............................................. t
2511 Natural barium sulfate (barytes); natural barium
carbonate (witherite), whether or not calcined, other
than barium oxide of heading 2816:
2511.10.0000 Natural barium sulfate (barytes).................... t
2511.20.0000 Natural barium carbonate (witherite)................ kg
2512.00.0000 Siliceous fossil meals (for example, kieselguhr,
tripolite and diatomite) and similar siliceous earths,
whether or not calcined, of an apparent specific
gravity of 1 or less................................... t
2513 Pumice; emery; natural corundum, natural garnet and
other natural abrasives, whether or not heat-treated:
Pumice:
2513.11.0000 Crude or in irregular pieces, including
crushed pumice................................... kg
2513.19.0000 Other............................................ kg
Emery, natural corundum, natural garnet and other
natural abrasives:
2513.21.0000 Crude or in irregular pieces..................... kg
2513.29.0000 Other............................................ kg
2514.00.0000 Slate, whether or not roughly trimmed or merely cut,
by sawing or otherwise, into blocks or slabs of a
rectangular (including square) shape................... t
2515 Marble, travertine and other calcareous monumental or
building stone of an apparent specific gravity of 2.5
or more, and alabaster, whether or not roughly trimmed
or merely cut, by sawing or otherwise, into blocks or
slabs of a rectangular (including square) shape:
Marble and travertine:
2515.11.0000 Crude or roughly trimmed......................... t
2515.12.0000 Merely cut, by sawing or otherwise, into blocks
or slabs of a rectangular (including square)
shape............................................ t
2515.20.0000 Other calcareous monumental or building stone;
alabaster........................................... t
2516 Granite, porphyry, basalt, sandstone and other
monumental or building stone, whether or not roughly
trimmed or merely cut, by sawing or otherwise, into
blocks or slabs of a rectangular (including square)
shape:
Granite:
2516.11.0000 Crude or roughly trimmed......................... t
2516.12.0000 Merely cut, by sawing or otherwise, into blocks
or slabs of a rectangular (including square)
shape............................................ t
Sandstone:
2516.21.0000 Crude or roughly trimmed......................... t
2516.22.0000 Merely cut, by sawing or otherwise, into blocks
or slabs of a rectangular (including square)
shape............................................ t
2516.90.0000 Other monumental or building stone.................. t
2517 Pebbles, gravel, broken or crushed stone, of a kind
commonly used for concrete aggregates, for road
metalling or for railway or other ballast; shingle and
flint, whether or not heat-treated; macadam of slag,
dross or similar industrial waste, whether or not
incorporating the materials cited in the first part of
the heading; tarred macadam; granules, chippings and
powder, of stones of heading 2515 or 2516, whether or
not heat-treated:
2517.10 Pebbles, gravel, broken or crushed stone, of a kind
commonly used for concrete aggregates, for road
metalling or for railway or other ballast, shingle
and flint, whether or not heat-treated:
2517.10.0015 Pebbles and gravel............................... t
2517.10.0020 Limestone, except pebbles and gravel............. t
2517.10.0055 Other............................................ t
2517.20.0000 Macadam of slag, dross or similar industrial waste,
whether or not incorporating the materials cited in
subheading 2517.10.................................. t
2517.30.0000 Tarred macadam...................................... t
Granules, chippings and powder, of stones of
heading 2515 or 2516, whether or not heat-treated:
2517.41.0000 Of marble........................................ t
2517.49.0000 Other............................................ t
2518 Dolomite, whether or not calcined; dolomite roughly
trimmed or merely cut, by sawing or otherwise, into
blocks or slabs of a rectangular (including square)
shape; agglomerated dolomite (including tarred
dolomite):
2518.10.0000 Dolomite not calcined............................... t
2518.20.0000 Calcined dolomite................................... t
2518.30.0000 Agglomerated dolomite (including tarred dolomite)... t
2519 Natural magnesium carbonate (magnesite); fused
magnesia; dead-burned (sintered) magnesia, whether or
not containing small quantities of other oxides added
before sintering; other magnesium oxide, whether or
not pure:
2519.10.0000 Natural magnesium carbonate (magnesite)............. t
2519.90 Other:
2519.90.1000 Fused magnesia and dead-burned (sintered)
magnesia......................................... kg
2519.90.2000 Caustic calcined magnesite....................... t
2519.90.5000 Other............................................ kg
2520 Gypsum; anhydrite; plasters (consisting of calcined
gypsum or calcium sulfate) whether or not colored,
with or without small quantities of accelerators or
retarders:
2520.10.0000 Gypsum; anhydrite................................... t
2520.20.0000 Plasters............................................ t
2521.00.0000 Limestone flux; limestone and other calcareous stone,
of a kind used for the manufacture of lime or cement
(or for soil improvement).............................. t
2522 Quicklime, slaked lime and hydraulic lime, other than
calcium oxide and hydroxide of heading 2825:
2522.10.0000 Quicklime........................................... kg
2522.20.0000 Slaked lime......................................... kg
2522.30.0000 Hydraulic lime...................................... kg
2523 Portland cement, aluminous cement, slag cement,
supersulfate cement and similar hydraulic cements,
whether or not colored or in the form of clinkers:
2523.10.0000 Cement clinkers..................................... t
Portland cement:
2523.21.0000 White cement, whether or not artificially colored t
2523.29.0000 Other............................................ t
2523.30.0000 Aluminous cement ................................... t
2523.90.0000 Other hydraulic cements............................. t
2524.00.0000 Asbestos............................................... t
2525 Mica, including splittings; mica waste:
2525.10.0000 Crude mica and mica rifted into sheets or splittings kg
2525.20.0000 Mica powder......................................... kg
2525.30.0000 Mica waste.......................................... kg
2526 Natural steatite, whether or not roughly trimmed or
merely cut, by sawing or otherwise, into blocks or
slabs of a rectangular (including square) shape; talc:
2526.10.0000 Not crushed, not powdered........................... kg
2526.20.0000 Crushed or powdered................................. t
2527.00.0000 Natural cryolite; natural chiolite..................... t
2528 Natural borates and concentrates thereof (calcined or
not), but not including borates separated from natural
brine; natural boric acid containing not more than 85
percent of H3BO3 calculated on the dry weight:
2528.10.0000 Natural sodium borates and concentrates thereof
(whether or not calcined) .......................... kg
2528.90.0000 Other............................................... kg
2529 Feldspar; leucite, nepheline and nepheline syenite;
fluorspar:
2529.10.0000 Feldspar............................................ t
Fluorspar:
2529.21.0000 Containing by weight 97 percent or less of
calcium fluoride................................. t
2529.22.0000 Containing by weight more than 97 percent of
calcium fluoride................................. t
2529.30.0000 Leucite; nepheline and nepheline syenite............ t
2530 Mineral substances not elsewhere specified or included:
2530.10.0000 Vermiculite, perlite and chlorites, unexpanded...... kg
2530.20.0000 Kieserite, epsom salts (natural magnesium sulfates). kg
2530.30.0000 Earth colors........................................ kg
2530.40.0000 Natural micaceous iron oxides....................... kg
2530.90.0000 Other............................................... kg
26
2601 Iron ores and concentrates, including roasted iron
pyrites:
Iron ores and concentrates, other than roasted iron
pyrites:
Concentrates and non-agglomerated ores:
2601.11.0030 Concentrates.................................. t
Other:
2601.11.0060 Coarse..................................... t
2601.11.0090 Other...................................... t
Agglomerated ores:
2601.12.0030 Pellets....................................... t
2601.12.0060 Briquettes.................................... t
2601.12.0090 Other......................................... t
2601.20.0000 Roasted iron pyrites................................ t
2602.00.0000 Manganese ores and concentrates, including
manganiferous iron ores and concentrates with a
manganese content of 20 percent or more, calculated on
the dry weight......................................... kg
2603 Copper ores and concentrates:
2603.00.0010 Copper content...................................... kg
2603.00.0015 Precious metal content.............................. g
2603.00.0035 Other metal content................................. kg
2604 Nickel ores and concentrates:
2604.00.0040 Nickel content...................................... kg
2604.00.0080 Other metal content................................. kg
2605.00.0000 Cobalt ores and concentrates........................... kg
2606 Aluminum ores and concentrates:
Bauxite, calcined:
2606.00.0030 Refractory grade................................. t
2606.00.0060 Other............................................ t
2606.00.0090 Other............................................... t
2607 Lead ores and concentrates:
2607.00.0020 Lead content........................................ kg
2607.00.0025 Precious metal content.............................. g
2607.00.0045 Other metal content................................. kg
2608 Zinc ores and concentrates:
2608.00.0030 Zinc content........................................ kg
2608.00.0035 Precious metal content.............................. g
2608.00.0055 Other metal content................................. kg
2609.00.0000 Tin ores and concentrates.............................. t
2610.00.0000 Chromium ores and concentrates......................... t
2611.00.0000 Tungsten ores and concentrates......................... kg
2612 Uranium or thorium ores and concentrates:
2612.10.0000 Uranium ores and concentrates....................... kg
2612.20.0000 Thorium ores and concentrates....................... t
2613 Molybdenum ores and concentrates:
2613.10.0000 Roasted............................................. Cnt kg
2613.90.0000 Other............................................... Cnt kg
2614.00.0000 Titanium ores and concentrates......................... kg
2615 Niobium, tantalum, vanadium or zirconium ores and
concentrates:
2615.10.0000 Zirconium ores and concentrates..................... kg
2615.90 Other:
2615.90.3000 Synthetic tantalum-niobium (columbium)
concentrates..................................... kg
Other:
2615.90.6030 Niobium (columbium) ores and concentrates..... kg
2615.90.6060 Tantalum ores and concentrates................ kg
2615.90.6090 Vanadium ores and concentrates................ kg
2616 Precious metal ores and concentrates:
Silver ores and concentrates:
2616.10.0040 Silver content................................... g
2616.10.0045 Other metal content.............................. X
2616.90 Other:
2616.90.0040 Gold content..................................... g
2616.90.0050 Other precious metal content..................... g
2616.90.0070 Other metal content.............................. X
2617 Other ores and concentrates:
2617.10.0000 Antimony ores and concentrates...................... kg
2617.90.0000 Other............................................... kg
2618.00.0000 Granulated slag (slag sand) from the manufacture of
iron or steel.......................................... t
2619.00.0000 Slag, dross (other than granulated slag), scalings and
other waste from the manufacture of iron or steel...... kg
2620 Ash and residues (other than from the manufacture of
iron or steel) containing metals or metal compounds:
Containing mainly zinc:
2620.11.0000 Hard zinc spelter................................ kg
2620.19.0000 Other............................................ Cnt kg
2620.20.0000 Containing mainly lead.............................. Cnt kg
2620.30.0000 Containing mainly copper............................ Cnt kg
2620.40.0000 Containing mainly aluminum.......................... kg
2620.50.0000 Containing mainly vanadium.......................... kg
2620.90.0000 Other............................................... kg
2621.00.0000 Other slag and ash, including seaweed ash (kelp)....... t
27
2701 Coal; briquettes, ovoids and similar solid fuels
manufactured from coal:
Coal, whether or not pulverized, but not
agglomerated:
2701.11.0000 Anthracite....................................... t
2701.12 Bituminous coal:
2701.12.0010 Metallurgical coal............................ t
2701.12.0050 Other bituminous coal......................... t
2701.19.0000 Other coal....................................... t
2701.20.0000 Briquettes, ovoids and similar solid fuels
manufactured from coal.............................. t
2702 Lignite, whether or not agglomerated, excluding jet:
2702.10.0000 Lignite, whether or not pulverized, but not
agglomerated........................................ t
2702.20.0000 Agglomerated lignite................................ t
2703.00.0000 Peat (including peat litter), whether or not
agglomerated........................................... t
2704 Coke and semicoke of coal, of lignite or of peat,
whether or not agglomerated; retort carbon:
2704.00.0010 Coal coke and semicoke, commercially suitable for
use as fuel......................................... t
2704.00.0020 Coal coke and semicoke, not commercially suitable
for use as fuel..................................... t
2704.00.0050 Other............................................... t
2705.00.0000 Coal gas, water gas, producer gas and similar gases,
other than petroleum gases and other gaseous
hydrocarbons........................................... Ths m3
2706.00.0000 Tar distilled from coal, from lignite or from peat,
and other mineral tars, whether or not dehydrated or
partially distilled, including reconstituted tars...... liter
2707 Oils and other products of the distillation of high
temperature coal tar; similar products in which the
weight of the aromatic constituents exceeds that of
the nonaromatic constituents:
2707.10.0000 Benzene............................................. liter
2707.20.0000 Toluene............................................. liter
2707.30 Xylenes:
2707.30.0020 o-Xylene......................................... liter
2707.30.0030 p-Xylene......................................... liter
2707.30.0060 Other............................................ liter
2707.40.0000 Naphthalene......................................... liter
2707.50.0000 Other aromatic hydrocarbon mixtures of which 65
percent or more by volume (including losses)
distills at 250 degrees C by the ASTM D 86 method... liter
2707.60.0000 Phenols............................................. kg
Other:
2707.91.0000 Creosote oils.................................... liter
2707.99 Other:
2707.99.1000 Light oil..................................... liter
2707.99.2000 Picolines..................................... kg
2707.99.3000 Metacresol, orthocresol, paracresol and
metaparacresol, all the foregoing having a
purity of 75 percent or more by weight........ kg
2707.99.4000 Carbazole having a purity of 65 percent or
more by weight................................ kg
2707.99.5010 Carbon black feedstock........................ Bbl
2707.99.5090 Other......................................... kg
2708 Pitch and pitch coke, obtained from coal tar or from
other mineral tars:
2708.10.0000 Pitch............................................... kg
2708.20.0000 Pitch coke.......................................... kg
2709 Petroleum oils and oils obtained from bituminous
minerals, crude:
2709.00.1000 Testing under 25 degrees A.P.I...................... Bbl
2709.00.2000 Testing 25 degrees A.P.I. or more................... Bbl
2710 Petroleum oils and oils obtained from bituminous
minerals, other than crude; preparations not elsewhere
specified or included, containing by weight 70 percent
or more of petroleum oils or of oils obtained from
bituminous minerals, these oils being the basic
constituents of the preparations:
Distillate and residual fuel oils (including
blended fuel oils):
Testing under 25 degrees A.P.I.:
Having a Saybolt Universal viscosity at 37.8
degrees C of 45 seconds or more but not more
than 125 seconds (No. 4-type fuel oils):
2710.00.0505 Not more than 0.05 percent sulfur, by
weight..................................... Bbl
2710.00.0515 More than 0.05 percent sulfur, by weight... Bbl
2710.00.0520 Having a Saybolt Universal viscosity at 37.8
degrees C of more than 125 seconds (heavy
fuel oils).................................... Bbl
2710.00.0550 Other......................................... Bbl
Testing 25 degrees A.P.I or more:
Having a Saybolt Universal viscosity at 37.8
degrees C of less than 45 seconds (light fuel
oils):
2710.00.1005 Not more than 0.05 percent sulfur, by
weight..................................... Bbl
2710.00.1007 More than 0.05 percent sulfur by weight.... Bbl
Having a Saybolt Universal viscosity at 37.8
degrees C of 45 seconds or more but not more
than 125 seconds (No. 4-type fuel oils):
2710.00.1015 Not more than 0.05 percent sulfur, by
weight..................................... Bbl
2710.00.1025 More than 0.05 percent sulfur by weight.... Bbl
2710.00.1050 Having a Saybolt Universal viscosity at 37.8
degrees C of more than 125 seconds (heavy
fuel oils).................................... Bbl
Motor fuel:
2710.00.1510 Gasoline, leaded................................. Bbl
Gasoline, unleaded:
2710.00.1514 Reformulated.................................. Bbl
2710.00.1516 Oxygenated.................................... Bbl
2710.00.1518 Other......................................... Bbl
2710.00.1520 Jet fuel, naphtha-type........................... Bbl
2710.00.1530 Jet fuel, kerosene-type.......................... Bbl
2710.00.1550 Other............................................ Bbl
2710.00.1800 Motor fuel blending stock........................... Bbl
2710.00.2000 Kerosene (except motor fuel or motor fuel blending
stock).............................................. Bbl
2710.00.2500 Naphthas (except motor fuel or motor fuel blending
stock).............................................. Bbl
Lubricating oils and greases, with or without
additives:
Oils:
2710.00.3010 Aviation engine lubricating oils, except jet
engine lubricating oils....................... Bbl
2710.00.3020 Automotive, diesel and marine engine (except
turbine) lubricating oils..................... Bbl
2710.00.3030 Turbine lubricating oils, including marine.... Bbl
2710.00.3040 Automotive gear oils.......................... Bbl
2710.00.3050 Steam cylinder oils........................... Bbl
2710.00.3070 Quenching or cutting oils..................... Bbl
2710.00.3080 Other, except white mineral oils.............. Bbl
2710.00.3700 Greases.......................................... Bbl
Other:
2710.00.5010 Condensate derived wholly from natural gas....... Bbl
2710.00.5030 White mineral oil, medicinal grade............... Bbl
2710.00.5040 White mineral oil, except medicinal grade........ Bbl
2710.00.5045 Insulating or transformer oils................... Bbl
2710.00.5060 Other............................................ X
2711 Petroleum gases and other gaseous hydrocarbons:
Liquefied:
2711.11.0000 Natural gas..................................... Ths m3
2711.12.0000 Propane......................................... Bbl
2711.13.0000 Butanes......................................... Bbl
2711.14.0000 Ethylene, propylene, butylene and butadiene..... kg
2711.19.0000 Other........................................... X
In gaseous state:
2711.21.0000 Natural gas..................................... Ths m3
2711.29.0000 Other........................................... X
2712 Petroleum jelly; paraffin wax, microcrystalline
petroleum wax, slack wax, ozokerite, lignite wax, peat
wax, other mineral waxes, and similar products
obtained by synthesis or by other processes, whether
or not colored:
2712.10.0000 Petroleum jelly..................................... kg
2712.20.0000 Paraffin wax containing by weight less than 0.75
percent of oil...................................... kg
2712.90.0000 Other............................................... kg
2713 Petroleum coke, petroleum bitumen and other residues
of petroleum oils or of oils obtained from bituminous
minerals:
Petroleum coke:
2713.11.0000 Not calcined..................................... t
2713.12.0000 Calcined......................................... t
2713.20.0000 Petroleum bitumen................................... t
2713.90.0000 Other residues of petroleum oils or of oils
obtained from bituminous minerals................... t
2714 Bitumen and asphalt, natural; bituminous or oil shale
and tar sands; asphaltites and asphaltic rocks:
2714.10.0000 Bituminous or oil shale and tar sands............... t
2714.90.0000 Other............................................... t
2715.00.0000 Bituminous mixtures based on natural asphalt, on
natural bitumen, on petroleum bitumen, on mineral tar
or on mineral tar pitch (for example, bituminous
mastics, cut-backs).................................... t
2716.00.0000 Electrical energy...................................... kWh
68
6801.00.0000 Setts, curbstones and flagstones, of natural stone
(except slate)......................................... t
6802 Worked monumental or building stone (except slate) and
articles thereof, other than goods of heading 6801;
mosaic cubes and the like, of natural stone (including
slate), whether or not on a backing; artificially
colored granules, chippings and powder, of natural
stone (including slate):
6802.10.0000 Tiles, cubes and similar articles, whether or not
rectangular (including square), the largest surface
area of which is capable of being enclosed in a
square the side of which is less than
7 cm (2.76 inches); artificially colored granules,
chippings and powder................................ X
Other monumental or building stone and articles
thereof, simply cut or sawn, with a flat or even
surface:
6802.21.0000 Marble, travertine and alabaster................. t
6802.22.0000 Other calcareous stone........................... t
6802.23.0000 Granite.......................................... t
6802.29.0000 Other stone...................................... t
Other:
6802.91.0000 Marble, travertine and alabaster................. t
6802.92.0000 Other calcareous stone........................... t
6802.93.0000 Granite.......................................... t
6802.99.0000 Other stone...................................... t
6803.00.0000 Worked slate and articles of slate or of agglomerated
slate.................................................. X
6804 Millstones, grindstones, grinding wheels and the like,
without frameworks, for grinding, sharpening,
polishing, trueing or cutting, hand sharpening or
polishing stones, and parts thereof, of natural
stone, of agglomerated natural or artificial
abrasives, or of ceramics, with or without parts of
other materials:
6804.10.0000 Millstones and grindstones for milling, grinding
or pulping.......................................... No.
Other millstones, grindstones, grinding wheels and
the like:
6804.21.0000 Of agglomerated synthetic or natural diamond..... No.
6804.22.0000 Of other agglomerated abrasives or of ceramics... X
6804.23.0000 Of natural stone................................. No.
6804.30.0000 Hand sharpening or polishing stones................. No.
6805 Natural or artificial abrasive powder or grain, on a
base of textile material, of paper, of paperboard or
of other materials, whether or not cut to shape or
sewn or otherwise made up:
6805.10.0000 On a base of woven textile fabric only.............. kg
6805.20.0000 On a base of paper or paperboard only............... kg
6805.30.0000 On a base of other materials........................ kg
6806 Slag wool, rock wool and similar mineral wools;
exfoliated vermiculite, expanded clays, foamed slag
and similar expanded mineral materials; mixtures and
articles of heat-insulating, sound-insulating or
sound-absorbing mineral materials, other than those of
heading 6811 or 6812 or of chapter 69:
6806.10.0000 Slag wool, rock wool and similar mineral wools
(including intermixtures thereof), in bulk, sheets
or rolls............................................ X
6806.20.0000 Exfoliated vermiculite, expanded clays, foamed slag
and similar expanded mineral materials (including
intermixtures thereof).............................. kg
6806.90 Other:
6806.90.0010 Acoustical pads and boards....................... m2
6806.90.0050 Other............................................ X
6807 Articles of asphalt or of similar material (for
example, petroleum bitumen or coal tar pitch):
6807.10.0000 In rolls............................................ kg
Other:
6807.90.0010 Articles of a kind used for roofing or siding.... kg
6807.90.0050 Other............................................ kg
6808.00.0000 Panels, boards, tiles, blocks and similar articles of
vegetable fiber, of straw or of shavings, chips,
particles, sawdust or other waste, of wood,
agglomerated with cement, plaster or
other mineral binders.................................. kg
6809 Articles of plaster or of compositions based on
plaster:
Boards, sheets, panels, tiles and similar articles,
not ornamented:
6809.11.0000 Faced or reinforced with paper or
paperboard only.................................. kg
6809.19.0000 Other............................................ X
6809.90.0000 Other articles...................................... X
6810 Articles of cement, of concrete or of artificial
stone, whether or not reinforced:
Tiles, flagstones, bricks and similar articles:
6810.11.0000 Building blocks and bricks....................... X
6810.19 Other:
6810.19.1000 Floor and wall tiles.......................... m2
6810.19.5000 Other......................................... X
6810.20.0000 Pipes............................................... X
Other articles:
6810.91.0000 Prefabricated structural components for building
or civil engineering............................. X
6810.99.0000 Other............................................ X
6811 Articles of asbestos-cement, of cellulose fiber-cement
or the like:
6811.10.0000 Corrugated sheets................................... kg
6811.20.0000 Other sheets, panels, tiles and similar articles.... kg
6811.30.0000 Tubes, pipes and tube or pipe fittings.............. kg
6811.90.0000 Other articles...................................... kg
6812 Fabricated asbestos fibers; mixtures with a basis of
asbestos or with a basis of asbestos and magnesium
carbonate; articles of such mixtures or of asbestos
(for example, thread, woven fabric, clothing, headgear,
footwear, gaskets), whether or not reinforced, other
than goods of heading 6811 or 6813:
6812.10.0000 Fabricated asbestos fibers; mixtures with a basis
of asbestos or with a basis of asbestos and
magnesium carbonate................................. kg
6812.20.0000 Yarn and thread..................................... kg
6812.30.0000 Cords and string, whether or not plaited............ kg
6812.40.0000 Woven or knitted fabric............................. kg
6812.50.0000 Clothing, clothing accessories, footwear and
headgear............................................ kg
6812.60.0000 Paper, millboard and felt........................... X
6812.70.0000 Compressed asbestos fiber jointing, in sheets or
rolls............................................... X
6812.90 Other:
6812.90.0010 For use in civil aircraft........................ X
Other:
6812.90.0020 Gaskets, packing and seals.................... kg
6812.90.0050 Other......................................... X
6813 Friction material and articles thereof (for example,
sheets, rolls, strips, segments, discs, washers,
pads), not mounted, for brakes, for clutches or the
like, with a basis of asbestos, of other mineral
substances or of cellulose, whether or not combined
with textile or other materials:
6813.10.0000 Brake linings and pads.............................. X
6813.90.0000 Other............................................... X
6814 Worked mica and articles of mica, including
agglomerated or reconstituted mica, whether or not on
a support of paper, paperboard or other materials:
6814.10.0000 Plates, sheets and strips of agglomerated or
reconstituted mica, whether or not on a support..... kg
6814.90.0000 Other............................................... kg
6815 Articles of stone or of other mineral substances
(including articles of peat), not elsewhere specified
or included:
6815.10.0000 Nonelectrical articles of graphite or other carbon.. X
6815.20.0000 Articles of peat.................................... X
Other articles:
6815.91.0000 Containing magnesite, dolomite or chromite....... X
6815.99.0000 Other............................................ X
69
6901.00.0000 Bricks, blocks, tiles and other ceramic goods of
siliceous fossil meals (for example, kieselguhr,
tripolite or diatomite) or of similar siliceous
earths................................................. t
6902 Refractory bricks, blocks, tiles and similar
refractory ceramic constructional goods, other than
those of siliceous fossil meals or similar siliceous
earths:
6902.10 Containing by weight, singly or together, more than
50 percent of the elements magnesium, calcium, or
chromium, expressed as MgO, CaO or Cr2O3:
6902.10.1000 Magnesite bricks................................. Thsnds
6902.10.5000 Other............................................ t
6902.20 Containing by weight more than 50 percent of
alumina (Al2O3), of silica (SiO2) or of a mixture
or compound of these products:
Bricks:
6902.20.1010 Alumina....................................... Thsnds
6902.20.1020 Other......................................... Thsnds
Other:
6902.20.5010 Alumina....................................... t
6902.20.5020 Other......................................... t
6902.90 Other:
Bricks:
6902.90.1010 Of clay....................................... Thsnds
6902.90.1020 Nonclay....................................... t
Other:
6902.90.5010 Of clay....................................... t
6902.90.5020 Nonclay....................................... t
6903 Other refractory ceramic goods (for example, retorts,
crucibles, muffles, nozzles, plugs, supports, cupels,
tubes, pipes, sheaths and rods), other than those of
siliceous fossil meals or of similar siliceous earths:
6903.10.0000 Containing by weight more than 50 percent of
graphite or other forms of carbon or of a mixture
of these products................................... kg
6903.20.0000 Containing by weight more than 50 percent of
alumina (Al2O3) or of a mixture or compound of
alumina and of silica (SiO2)........................ kg
6903.90 Other:
6903.90.0010 Of clay.......................................... kg
6903.90.0050 Other (nonclay).................................. kg
6904 Ceramic building bricks, flooring blocks, support or
filler tiles and the like:
6904.10 Building bricks:
6904.10.0015 Solid bricks..................................... Thsnds
6904.10.0090 Hollow bricks.................................... Thsnds
6904.90.0000 Other............................................... X
6905 Roofing tiles, chimney pots, cowls, chimney liners,
architectural ornaments and other ceramic
constructional goods:
6905.10.0000 Roofing tiles....................................... X
6905.90.0000 Other............................................... X
6906.00.0000 Ceramic pipes, conduits, guttering and pipe fittings... kg
6907 Unglazed ceramic flags and paving, hearth or wall
tiles; unglazed ceramic mosaic cubes and the like,
whether or not on a backing:
6907.10.0000 Tiles, cubes and similar articles, whether or not
rectangular, the largest surface area of which is
capable of being enclosed in a square the side of
which is less than 7 cm (2.76 inches)............... m2
6907.90.0000 Other............................................... m2
6908 Glazed ceramic flags and paving, hearth or wall tiles;
glazed ceramic mosaic cubes and the like, whether or
not on a backing:
6908.10.0000 Tiles, cubes and similar articles, whether or not
rectangular, the largest surface area of which is
capable of being enclosed in a square the side of
which is less than 7 cm (2.76 inches)............... m2
6908.90.0000 Other............................................... m2
6909 Ceramic wares for laboratory, chemical or other
technical uses; ceramic troughs, tubs and similar
receptacles of a kind used in agriculture; ceramic
pots, jars and similar articles of a kind used for the
conveyance or packing of goods:
Ceramic wares for laboratory, chemical or other
technical uses:
6909.11.0000 Of porcelain or china............................ X
6909.19 Other:
6909.19.1000 Ferrite core memories......................... X
6909.19.5000 Other......................................... X
6909.90.0000 Other............................................... X
6910 Ceramic sinks, washbasins, washbasin pedestals, baths,
bidets, water closet bowls, flush tanks, urinals and
similar sanitary fixtures:
6910.10 Of porcelain or china:
6910.10.0005 Water closet bowls, flushometer type............. No.
6910.10.0010 Water closet bowls with tanks, in one piece...... No.
6910.10.0025 Other water closet bowls and flush tanks,
whether or not in sets........................... No.
6910.10.0030 Sinks and wash basins (lavatories) .............. No.
6910.10.0050 Other............................................ No.
6910.90.0000 Other............................................... X
6911 Tableware, kitchenware, other household articles and
toilet articles, of porcelain or china:
6911.10 Tableware and kitchenware:
6911.10.1000 Hotel and restaurant ware and other ware not
household ware .................................. Dz Pcs
6911.10.5500 Other............................................ Dz Pcs
6911.90 Other:
6911.90.0010 Toilet articles.................................. X
6911.90.0050 Other............................................ X
6912.00 Ceramic tableware, kitchenware, other household
articles and toilet articles, other than of porcelain
or china:
Tableware and kitchenware:
6912.00.1000 Of coarse-grained earthenware, or of coarse-
grained stoneware; of fine-grained earthenware,
whether or not decorated, having a reddish-
colored body and a lustrous glaze which, on tea-
pots may be any color, but which, on other arti-
cles, must be mottled, streaked, or solidly
colored brown to black with metallic oxide or
salt............................................. Dz Pcs
6912.00.2500 Other............................................ Dz Pcs
6912.00.5000 Other............................................... X
6913 Statuettes and other ornamental ceramic articles:
6913.10.0000 Of porcelain or china............................... X
6913.90.0000 Other............................................... X
6914 Other ceramic articles:
6914.10.0000 Of porcelain or china............................... X
6914.90.0000 Other............................................... X
70
7001.00.0000 Cullet and other waste and scrap of glass; glass in
the mass............................................... kg
7002 Glass in balls (other than microspheres of heading
7018), rods or tubes, unworked:
7002.10.0000 Balls............................................... kg
7002.20.0000 Rods................................................ kg
Tubes:
7002.31.0000 Of fused quartz or other fused silica............ kg
7002.32.0000 Of other glass having a linear coefficient of
expansion not exceeding 5x10-6 per Kelvin
within a temperature range of 0 degrees C to 300
degrees C........................................ kg
7002.39 Other:
7002.39.0010 Unworked glass tubes not exceeding 200 mm
(7.874 inches) in length...................... No.
7002.39.0090 Other......................................... kg
7003 Cast glass and rolled glass, in sheets or profiles,
whether or not having an absorbent or reflecting
layer, but not otherwise worked:
Nonwired sheets:
7003.11.0000 Colored throughout the mass (body tinted),
opacified, flashed or having an absorbent or
reflecting layer................................. m2
7003.19.0000 Other............................................ m2
7003.20.0000 Wired sheets........................................ m2
7003.30.0000 Profiles............................................ m2
7004 Drawn glass and blown glass, in sheets, whether or not
having an absorbent or reflecting layer, but not
otherwise worked:
7004.10.0000 Glass, colored throughout the mass (body tinted),
opacified, flashed or having an absorbent or
reflecting layer.................................... m2
7004.90.0000 Other glass......................................... m2
7005 Float glass and surface ground or polished glass, in
sheets, whether or not having an absorbent or
reflecting layer, but not otherwise worked:
7005.10.0000 Nonwired glass, having an absorbent or reflecting
layer............................................... m2
Other nonwired glass:
7005.21.0000 Colored throughout the mass (body tinted),
opacified, flashed or merely surface ground...... m2
7005.29.0000 Other............................................ m2
7005.30.0000 Wired glass......................................... m2
7006.00.0000 Glass of heading 7003, 7004 or 7005, bent,
edge-worked, engraved, drilled, enameled or otherwise
worked, but not framed or fitted with other materials.. m2
7007 Safety glass, consisting of toughened (tempered) or
laminated glass:
Toughened (tempered) safety glass:
7007.11.0000 Of size and shape suitable for incorporation in
vehicles, aircraft, spacecraft or vessels........ m2
7007.19.0000 Other............................................ m2
Laminated safety glass:
7007.21 Of size and shape suitable for incorporation in
vehicles, aircraft, spacecraft or vessels:
7007.21.1000 Windshields................................... m2
7007.21.5000 Other......................................... m2
7007.29.0000 Other............................................ X
7008.00.0000 Multiple-walled insulating units of glass.............. No.
7009 Glass mirrors, whether or not framed, including
rearview mirrors:
7009.10.0000 Rearview mirrors for vehicles....................... No.
Other:
7009.91.0000 Unframed......................................... No.
7009.92.0000 Framed........................................... No.
7010 Carboys, bottles, flasks, jars, pots, vials, ampoules
and other containers, of glass, of a kind used for the
conveyance or packing of goods; preserving jars of
glass; stoppers, lids and other closures, of glass:
7010.10.0000 Ampoules............................................ Gross
7010.90 Other:
7010.90.0500 Pharmaceutical containers........................ Gross
7010.90.4000 Closures exported separately; containers (with
or without their closures) of a kind used for the
conveyance or packing of perfume and other toilet
preparations; other containers if fitted with
or designed for use with ground glass stoppers... Gross
Other containers (with or without their
closures):
7010.90.5010 Holding not over 118 ml (4 oz.)............... Gross
Holding over 118 ml (4 oz.) but not over
473 ml (16 oz.):
7010.90.5020 Having a wide mouth (38 mm (1.5 inches)
outside diameter and above)................ Gross
7010.90.5030 Other...................................... Gross
Holding over 473 ml (16 oz.):
7010.90.5040 Having a wide mouth (38 mm (1.5 inches)
outside diameter and above)................ Gross
7010.90.5050 Other...................................... Gross
7011 Glass envelopes (including bulbs and tubes), open, and
glass parts thereof, without fittings, for electric
lamps, cathode-ray tubes or the like:
7011.10.0000 For electric lighting............................... Thsnds
7011.20.0000 For cathode-ray tubes............................... Hundr
7011.90.0000 Other............................................... X
7012.00.0000 Glass inners for vacuum flasks or for other vacuum
vessels................................................ No.
7013 Glassware of a kind used for table, kitchen, toilet,
office, indoor decoration or similar purposes (other
than that of heading 7010 or 7018):
7013.10.0000 Of glass-ceramics................................... No.
Drinking glasses other than of glass-ceramics:
7013.21.0000 Of lead crystal.................................. No.
7013.29.0000 Other............................................ No.
Glassware of a kind used for table (other than
drinking glasses) or kitchen purposes other than of
glass-ceramics:
7013.31.0000 Of lead crystal.................................. No.
7013.32.0000 Of glass having a linear coefficient of
expansion not exceeding 5x10-6 per Kelvin within
a temperature range of 0 degrees C to 300
degrees C........................................ No.
7013.39.0000 Other............................................ No.
Other glassware:
7013.91.0000 Of lead crystal.................................. No.
7013.99.0000 Other............................................ No.
7014 Signalling glassware and optical elements of glass
(other than those of heading 7015), not optically
worked:
Optical elements:
7014.00.1000 Lens blanks (other than for spectacles).......... No.
7014.00.2000 Other............................................ No.
Other:
7014.00.3000 Lenses and filters, and parts thereof............ X
7014.00.5000 Other............................................ X
7015 Clock or watch glasses and similar glasses; glasses
for noncorrective or corrective spectacles, curved,
bent, hollowed or the like, not optically worked;
hollow glass spheres and their segments for the
manufacture of such glasses:
7015.10.0000 Glasses for corrective spectacles................... No.
7015.90.0000 Other............................................... X
7016 Paving blocks, slabs, bricks, squares, tiles and other
articles of pressed or molded glass, whether or not
wired, of a kind used for building or construction
purposes; glass cubes and other glass smallwares,
(rectangles, fragments, or chippings) whether or not
on a backing, for mosaics or similar decorative
purposes; leaded glass windows and the like;
multicellular or foam glass in blocks, panels, plates,
shells or similar forms:
7016.10.0000 Glass cubes and other glass smallwares whether or
not on a backing, for mosaics or similar decorative
purposes............................................ X
7016.90.0000 Other............................................... X
7017 Laboratory, hygienic or pharmaceutical glassware,
whether or not graduated or calibrated:
7017.10.0000 Of fused quartz or other fused silica............... X
7017.20.0000 Of other glass having a linear coefficient of
expansion not exceeding 5x10-6 per Kelvin within a
temperature range of 0 degrees C to 300 degrees C... X
7017.90 Other:
7017.90.0010 Microscope slides and micro cover glasses........ X
7017.90.0050 Other............................................ X
7018 Glass beads, imitation pearls, imitation precious or
semiprecious stones and similar glass smallwares, and
articles thereof other than imitation jewelry; glass
eyes other than prosthetic articles; statuettes and
other ornaments of lamp-worked glass, other than imita-
tion jewelry; glass microspheres not exceeding 1 mm
(.039 inch) in diameter:
7018.10.0000 Glass beads, imitation pearls, imitation precious
or semiprecious stones and similar glass
smallwares.......................................... X
7018.20.0000 Glass microspheres not exceeding 1 mm (.039 inch)
in diameter......................................... kg
7018.90.0000 Other............................................... X
7019 Glass fibers (including glass wool) and articles
thereof (for example, yarn, woven fabrics):
7019.10 Slivers, rovings, yarn, and chopped strands:
Yarn:
7019.10.1040 Not colored, of a kind used in industry as
packing or lubricating materials.............. kg
7019.10.1050 Other......................................... kg
7019.10.3000 Chopped strands.................................. kg
7019.10.4040 Rovings, of a kind used in industry as packing
or lubricating materials......................... kg
7019.10.4050 Other............................................ kg
7019.20 Woven fabrics, including narrow fabrics:
7019.20.1000 Narrow fabrics................................... m2
kg
7019.20.4000 Other............................................ m2
kg
Thin sheets (voiles) webs, mats, mattresses, boards
and similar nonwoven products:
7019.31.0000 Mats............................................. kg
7019.32.0000 Thin sheets (voiles)............................. kg
7019.39 Other:
7019.39.1000 Insulation products........................... X
7019.39.5000 Other......................................... X
7019.90 Other:
7019.90.1000 Woven............................................ X
Other:
7019.90.5020 Glass fibers in bulk.......................... X
7019.90.5040 Glass fiber filters (nonwoven)................ X
7019.90.5050 Other......................................... X
7020.00.0000 Other articles of glass................................ X
71
7101 Pearls, natural or cultured, whether or not worked or
graded but not strung, mounted or set; ungraded
pearls, natural or cultured, temporarily strung for
convenience of transport:
7101.10.0000 Natural pearls...................................... X
Cultured pearls:
7101.21.0000 Unworked......................................... X
7101.22.0000 Worked........................................... X
7102 Diamonds, whether or not worked, but not mounted or
set:
7102.10.0000 Unsorted............................................ carat
Industrial:
7102.21.0000 Unworked or simply sawn, cleaved or bruted....... carat
7102.29.0000 Other............................................ carat
Nonindustrial:
7102.31.0000 Unworked or simply sawn, cleaved or bruted....... carat
7102.39 Other:
7102.39.0010 Weighing not over 0.5 carat each.............. carat
7102.39.0050 Weighing over 0.5 carat each.................. carat
7103 Precious stones (other than diamonds) and semiprecious
stones, whether or not worked or graded but not
strung, mounted or set; ungraded precious stones
(other than diamonds) and semiprecious stones,
temporarily strung for convenience of transport:
7103.10 Unworked or simply sawn or roughly shaped:
7103.10.2000 Unworked ........................................ carat
7103.10.4000 Other............................................ carat
Otherwise worked:
7103.91.0000 Rubies, sapphires and emeralds................... X
7103.99 Other:
7103.99.1000 Cut but not set, and suitable for use in the
manufacture of jewelry........................ X
7103.99.5000 Other......................................... X
7104 Synthetic or reconstructed precious or semiprecious
stones, whether or not worked or graded but not
strung, mounted or set; ungraded synthetic or
reconstructed precious or semiprecious stones,
temporarily strung for convenience of transport:
7104.10.0000 Piezo-electric quartz............................... kg
7104.20.0000 Other, unworked or simply sawn or roughly shaped.... X
7104.90 Other:
7104.90.1000 Cut but not set, and suitable for use in the
manufacture of jewelry........................... No.
7104.90.5000 Other............................................ X
7105 Dust and powder of natural or synthetic precious or
semiprecious stones:
Of diamonds:
7105.10.0010 Natural.......................................... carat
7105.10.0025 Synthetic........................................ carat
7105.90.0000 Other............................................... kg
7106 Silver (including silver plated with gold or
platinum), unwrought or in semimanufactured forms, or
in powder form:
7106.10.0000 Powder.............................................. g
Other:
Unwrought:
Bullion and dore:
7106.91.1010 Bullion................silver content...... g
7106.91.1020 Dore...................silver content...... g
7106.91.5000 Other......................................... g
7106.92.0000 Semimanufactured................................. g
7107.00.0000 Base metals clad with silver, not further worked than
semimanufactured....................................... g
7108 Gold (including gold plated with platinum) unwrought
or in semimanufactured forms, or in powder form:
Nonmonetary:
7108.11.0000 Powder........................................... g
7108.12 Other unwrought forms:
Bullion and dore:
7108.12.1010 Bullion..................gold content...... g
7108.12.1020 Dore.....................gold content...... g
7108.12.5000 Other......................................... g
7108.13 Other semimanufactured forms:
7108.13.1000 Gold leaf..................................... cm2
7108.13.5000 Other......................................... g
7108.20.0000 Monetary............................................ g
7109.00.0000 Base metals or silver, clad with gold, not further
worked than semimanufactured........................... g
7110 Platinum, unwrought or in semimanufactured forms, or
in powder form:
Platinum:
7110.11.0000 Unwrought or in powder form......................
platinum content...... g
7110.19.0000 Other............................................
platinum content...... g
Palladium:
7110.21.0000 Unwrought or in powder form......................
palladium content...... g
7110.29.0000 Other............................................
palladium content...... g
Rhodium:
7110.31.0000 Unwrought or in powder form......................
rhodium content...... g
7110.39.0000 Other............................................
rhodium content...... g
Iridium, osmium and ruthenium:
7110.41.0000 Unwrought or in powder form...................... g
7110.49.0000 Other............................................ g
7111.00.0000 Base metals, silver or gold, clad with platinum, not
further worked than semimanufactured................... g
7112 Waste and scrap of precious metal or of metal clad
with precious metal:
7112.10.0000 Of gold, including metal clad with gold but
excluding sweepings containing other precious
metals.............................................. g
7112.20.0000 Of platinum, including metal clad with platinum but
excluding sweepings containing other precious
metals.............................................. g
7112.90.0000 Other............................................... g
7113 Articles of jewelry and parts thereof, of precious
metal or of metal clad with precious metal:
Of precious metal whether or not plated or clad
with precious metal:
7113.11.0000 Of silver, whether or not plated or clad with
other precious metal............................. X
7113.19.0000 Of other precious metal, whether or not plated
or clad with precious metal...................... X
7113.20.0000 Of base metal clad with precious metal.............. X
7114 Articles of goldsmiths' or silversmiths' wares and
parts thereof, of precious metal or of metal clad with
precious metal:
Of precious metal whether or not plated or clad
with precious metal:
7114.11 Of silver, whether or not plated or clad with
other precious metal:
7114.11.5100 Knives, forks, spoons or ladles, whether or
not combined in sets.......................... Pcs.
7114.11.5500 Articles not elsewhere specified or included
of a type used for household, table or kitchen
use; toilet and sanitary wares; all the fore-
going and parts thereof, of silver............ X
7114.11.7000 Other......................................... X
7114.19.0000 Of other precious metal, whether or not plated
or clad with precious metal...................... X
7114.20.0000 Of base metal clad with precious metal.............. X
7115 Other articles of precious metal or of metal clad with
precious metal:
7115.10.0000 Catalysts in the form of wire cloth or grill, of
platinum............................................ X
7115.90.0000 Other............................................... X
7116 Articles of natural or cultured pearls, precious or
semiprecious stones (natural, synthetic or
reconstructed):
7116.10 Of natural or cultured pearls:
7116.10.1000 Natural.......................................... X
7116.10.5000 Cultured......................................... X
7116.20 Of precious or semiprecious stones (natural,
synthetic or reconstructed):
7116.20.1000 Articles of jewelry.............................. X
7116.20.4000 Other............................................ X
7117 Imitation jewelry:
Of base metal, whether or not plated with precious
metal:
7117.11.0000 Cuff links and studs............................. X
7117.19.0000 Other............................................ X
7117.90.0000 Other............................................... X
7118 Coin:
7118.10.0000 Coin (other than gold coin), not being legal tender. X
7118.90 Other:
7118.90.0030 Gold..............................(gold content). g
7118.90.0050 Other than gold.................................. X
72
7201 Pig iron and spiegeleisen in pigs, blocks or other
primary forms:
7201.10.0000 Nonalloy pig iron containing by weight 0.5 percent
or less of phosphorus............................... t
7201.20.0000 Nonalloy pig iron containing by weight more than
0.5 percent of phosphorus........................... t
7201.30.0000 Alloy pig iron...................................... t
7201.40.0000 Spiegeleisen........................................ t
7202 Ferroalloys:
Ferromanganese:
7202.11.0000 Containing by weight more than 2 percent of
carbon........................................... kg
manganese content..................... kg
7202.19.0000 Other............................................ kg
manganese content..................... kg
Ferrosilicon:
7202.21.0000 Containing by weight more than 55 percent of
silicon.......................................... kg
silicon content....................... kg
7202.29.0000 Other............................................ kg
silicon content....................... kg
7202.30.0000 Ferrosilicon manganese.............................. kg
manganese content..................... kg
Ferrochromium:
7202.41.0000 Containing by weight more than 4 percent of
carbon........................................... kg
chromium content...................... kg
7202.49.0000 Other............................................ kg
chromium content...................... kg
7202.50.0000 Ferrosilicon chromium............................... kg
chromium content...................... kg
7202.60.0000 Ferronickel......................................... kg
nickel content........................ kg
7202.70.0000 Ferromolybdenum..................................... kg
molybdenum content.................... kg
7202.80.0000 Ferrotungsten and ferrosilicon tungsten............. kg
tungsten content...................... kg
Other:
7202.91.0000 Ferrotitanium and ferrosilicon titanium.......... kg
7202.92.0000 Ferrovanadium.................................... kg
vanadium content...................... kg
7202.93.0000 Ferroniobium..................................... kg
7202.99 Other:
7202.99.1000 Ferrozirconium................................ kg
Other:
7202.99.5020 Ferrophosphorus............................ kg
7202.99.5040 Other...................................... kg
7203 Ferrous products obtained by direct reduction of iron
ore and other spongy ferrous products, in lumps,
pellets or similar forms; iron having a minimum purity
by weight of 99.94 percent, in lumps, pellets or
similar forms:
7203.10.0000 Ferrous products obtained by direct reduction of
iron ore............................................ t
7203.90.0000 Other............................................... t
7204 Ferrous waste and scrap; remelting scrap ingots of
iron or steel:
7204.10.0000 Waste and scrap of cast iron........................ t
Waste and scrap of alloy steel:
7204.21.0000 Of stainless steel............................... t
7204.29.0000 Other............................................ t
7204.30.0000 Waste and scrap of tinned iron or steel............. t
7204.41 Other waste and scrap:
Turnings, shavings, chips, milling waste,
sawdust, filings, trimmings and stampings,
whether or not in bundles:
7204.41.0020 No. 1 bundles................................. t
7204.41.0040 No. 2 bundles................................. t
7204.41.0060 Borings, shovelings, and turnings............. t
7204.41.0080 Other......................................... t
7204.49 Other:
7204.49.0020 No. 1 heavy melting........................... t
7204.49.0040 No. 2 heavy melting........................... t
Other:
7204.49.0060 Cut plate and structural................... t
7204.49.0070 Shredded................................... t
7204.49.0080 Other...................................... t
7204.50.0000 Remelting scrap ingots.............................. t
7205 Granules and powders, of pig iron, spiegeleisen, iron
or steel:
7205.10.0000 Granules............................................ kg
Powders:
7205.21.0000 Of alloy steel................................... kg
7205.29.0000 Other............................................ t
7206 Iron and nonalloy steel in ingots or other primary
forms (excluding iron of heading 7203):
7206.10.0000 Ingots.............................................. kg
7206.90.0000 Other............................................... kg
7207 Semifinished products of iron or nonalloy steel:
Containing by weight less than 0.25 percent of
carbon:
7207.11.0000 Of rectangular (including square) cross-
section, the width measuring less than twice the
thickness........................................ kg
7207.12.0000 Other, of rectangular (other than square)
cross section.................................... kg
7207.19.0000 Other............................................ kg
7207.20.0000 Containing by weight 0.25 percent or more of carbon. kg
7208 Flat-rolled products of iron or nonalloy steel, of a
width of 600 mm (23.6 inches) or more, hot-rolled, not
clad, plated or coated:
In coils, not further worked than hot-rolled, of
high strength steel:
7208.11.0000 Of a thickness exceeding 10 mm (0.39 inch)....... kg
7208.12.0000 Of a thickness of 4.75 mm (0.187 inch) or more
but not exceeding 10 mm (0.39 inch).............. kg
7208.13.0000 Of a thickness of 3 mm (0.118 inch) or more but
less than 4.75 mm (0.187 inch)................... kg
7208.14.0000 Of a thickness of less than 3 mm (0.118 inch).... kg
Other, in coils, not further worked than hot-rolled:
7208.21.0000 Of a thickness exceeding 10 mm (0.39 inch)....... kg
7208.22.0000 Of a thickness of 4.75 mm (0.187 inch) or more
but not exceeding 10 mm (0.39 inch).............. kg
7208.23.0000 Of a thickness of 3 mm (0.118 inch) or more but
less than 4.75 mm (0.187 inch)................... kg
7208.24.0000 Of a thickness of less than 3 mm (0.118 inch).... kg
Not in coils, not further worked than hot-rolled,
of high-strength steel:
7208.31.0000 Universal mill plate............................. kg
7208.32.0000 Other, of a thickness exceeding 10 mm (0.39
inch)............................................ kg
7208.33.0000 Other, of a thickness of 4.75 mm (0.187 inch) or
more but not exceeding 10 mm (0.39 inch)......... kg
7208.34.0000 Other, of a thickness of 3 mm (0.118 inch) or
more but less than 4.75 mm (0.187 inch).......... kg
7208.35.0000 Other, of a thickness of less than 3 mm (0.118
inch)............................................ kg
Other, not in coils, not further worked than
hot-rolled:
7208.41.0000 Universal mill plate............................. kg
7208.42.0000 Other, of a thickness exceeding 10 mm (0.39
inch)............................................ kg
7208.43.0000 Other, of a thickness of 4.75 mm (0.187 inch) or
more but not exceeding 10 mm (0.39 inch)......... kg
7208.44.0000 Other, of a thickness of 3 mm (0.118 inch) or
more but less than 4.75 mm (0.187 inch).......... kg
7208.45.0000 Other, of a thickness of less than 3 mm (0.118
inch)............................................ kg
7208.90.0000 Other............................................... kg
7209 Flat-rolled products of iron or nonalloy steel, of a
width of 600 mm (23.6 inches) or more, cold-rolled
(cold-reduced), not clad, plated or coated:
In coils, not further worked than cold-rolled
(cold-reduced), of high-strength steel:
7209.11.0000 Of a thickness of 3 mm (0.118 inch) or more...... kg
7209.12.0000 Of a thickness exceeding 1 mm (0.039 inch) but
less than 3 mm (0.118 inch)...................... kg
7209.13.0000 Of a thickness of 0.5 mm (0.02 inch) or more
not exceeding 1 mm (0.039 inch).................. kg
7209.14.0000 Of a thickness of less than 0.5 mm (0.02 inch)... kg
Other, in coils, not further worked than
cold-rolled (cold-reduced):
7209.21.0000 Of a thickness of 3 mm (0.118 inch) or more...... kg
7209.22.0000 Of a thickness exceeding 1 mm (0.039 inch) but
less than 3 mm (0.118 inch)...................... kg
7209.23.0000 Of a thickness of 0.5 mm (0.02 inch) or more
but not exceeding 1 mm (0.039 inch).............. kg
7209.24 Of a thickness of less than 0.5 mm (0.02 inch):
7209.24.1000 Of a thickness of less than 0.361 mm (0.0142
inch) (blackplate) ........................... kg
7209.24.5000 Other......................................... kg
Not in coils, not further worked than cold-rolled
(cold-reduced), of high-strength steel:
7209.31.0000 Of a thickness of 3 mm (0.118 inch) or more...... kg
7209.32.0000 Of a thickness exceeding 1 mm (0.039 inch) but
less than 3 mm (0.118 inch)...................... kg
7209.33.0000 Of a thickness of 0.5 mm (0.02 inch) or more
but not exceeding 1 mm (0.039 inch).............. kg
7209.34.0000 Of a thickness of less than 0.5 mm (0.02 inch)... kg
Other, not in coils, not further worked than
cold-rolled (cold-reduced):
7209.41.0000 Of a thickness of 3 mm (0.118 inch) or more...... kg
7209.42.0000 Of a thickness exceeding 1 mm (0.039 inch) but
less than 3 mm (0.118 inch)...................... kg
7209.43.0000 Of a thickness of 0.5 mm (0.02 inch) or more
but not exceeding 1 mm (0.039 inch).............. kg
7209.44.0000 Of a thickness of less than 0.5 mm (0.02 inch)... kg
7209.90.0000 Other............................................... kg
7210 Flat-rolled products of iron or nonalloy steel, of a
width of 600 mm (23.6 inches) or more, clad, plated
or coated:
Plated or coated with tin:
7210.11.0000 Of a thickness of 0.5 mm (0.02 inch) or more..... kg
7210.12.0000 Of a thickness of less than 0.5 mm (0.02 inch)... kg
7210.20.0000 Plated or coated with lead, including terne-plate... kg
Electrolytically plated or coated with zinc:
7210.31.0000 Of high-strength steel........................... kg
7210.39.0000 Other............................................ kg
Otherwise plated or coated with zinc:
7210.41.0000 Corrugated....................................... kg
7210.49.0000 Other............................................ kg
7210.50.0000 Plated or coated with chromium oxides or with
chromium and chromium oxides........................ kg
7210.60.0000 Plated or coated with aluminum...................... kg
7210.70.0000 Painted, varnished or coated with plastics ......... kg
7210.90 Other:
7210.90.1000 Clad............................................. kg
7210.90.5000 Other............................................ kg
7211 Flat-rolled products of iron or nonalloy steel, of a
width of less than 600 mm (23.6 inches) not clad,
plated or coated:
Not further worked than hot-rolled, of high
strength steel:
7211.11.0000 Universal mill plate............................. kg
7211.12.0000 Other, of a thickness of 4.75 mm (0.187 inch) or
more............................................. kg
7211.19.0000 Other............................................ kg
Other, not further worked than hot-rolled:
7211.21.0000 Universal mill plate............................. kg
7211.22.0000 Other, of a thickness of 4.75 mm (0.187 inch) or
more............................................. kg
7211.29.0000 Other............................................ kg
7211.30.0000 Not further worked than cold-rolled (cold-reduced),
of high strength steel.............................. kg
Other, not further worked than cold-rolled
(cold-reduced):
7211.41.0000 Containing by weight less than 0.25 percent of
carbon........................................... kg
7211.49.0000 Other............................................ kg
7211.90.0000 Other............................................... kg
7212 Flat-rolled products of iron or nonalloy steel, of a
width of less than 600 mm (23.6 inches), clad,
plated or coated:
7212.10.0000 Plated or coated with tin........................... kg
Electrolytically plated or coated with zinc:
7212.21.0000 Of high-strength steel........................... kg
7212.29.0000 Other............................................ kg
7212.30.0000 Otherwise plated or coated with zinc................ kg
7212.40.0000 Painted, varnished or coated with plastics ......... kg
7212.50.0000 Otherwise plated or coated.......................... kg
7212.60.0000 Clad................................................ kg
7213 Bars and rods, hot-rolled, in irregularly wound coils,
of iron or nonalloy steel:
7213.10.0000 Concrete reinforcing bars and rods.................. kg
7213.20.0000 Of free-cutting steel............................... kg
Other, containing by weight less than 0.25 percent
of carbon:
7213.31.0000 Of circular cross section measuring less than 14
mm (0.55 inch) in diameter....................... kg
7213.39.0000 Other............................................ kg
Other, containing by weight 0.25 percent or more
but less than 0.6 percent of carbon:
7213.41.0000 Of circular cross section measuring less than 14
mm (0.55 inch) in diameter....................... kg
7213.49.0000 Other............................................ kg
7213.50.0000 Other, containing by weight 0.6 percent or more of
carbon.............................................. kg
7214 Other bars and rods of iron or nonalloy steel, not
further worked than forged, hot-rolled, hot-drawn or
hot-extruded, but including those twisted after
rolling:
7214.10.0000 Forged.............................................. kg
7214.20.0000 Concrete reinforcing bars and rods.................. kg
7214.30.0000 Of free-cutting steel............................... kg
7214.40.0000 Other, containing by weight less than 0.25 percent
of carbon........................................... kg
7214.50.0000 Other, containing by weight 0.25 percent or more
but less than 0.6 percent of carbon................. kg
7214.60.0000 Other, containing by weight 0.6 percent or more of
carbon.............................................. kg
7215 Other bars and rods, of iron or nonalloy steel:
7215.10.0000 Of free-cutting steel, not further worked than
cold-formed or cold-finished........................ kg
7215.20.0000 Other, not further worked than cold-formed or
cold-finished, containing by weight less than 0.25
percent of carbon................................... kg
7215.30.0000 Other, not further worked than cold-formed or
cold-finished, containing by weight 0.25 percent or
more but less than 0.6 percent of carbon............ kg
7215.40.0000 Other, not further worked than cold-formed or
cold-finished, containing by weight 0.6 percent or
more of carbon...................................... kg
7215.90.0000 Other............................................... kg
7216 Angles, shapes and sections of iron or nonalloy steel:
7216.10.0000 U, I or H sections, not further worked than
hot-rolled, hot-drawn or extruded, of a height of
less than 80 mm (3.15 inches)....................... kg
L or T sections, not further worked than
hot-rolled, hot-drawn or extruded, of a height of
less than 80 mm (3.15 inches):
7216.21.0000 L sections....................................... kg
7216.22.0000 T sections....................................... kg
U, I or H sections, not further worked than
hot-rolled, hot-drawn or extruded, of a height of
80 mm (3.15 inches) or more:
7216.31.0000 U sections....................................... kg
7216.32.0000 I sections (standard beams)...................... kg
7216.33.0000 H sections....................................... kg
7216.40.0000 L or T sections, not further worked than
hot-rolled, hot-drawn or extruded, of a height of
80 mm (3.15 inches) or more......................... kg
7216.50.0000 Other angles, shapes and sections, not further
worked than hot-rolled, hot-drawn or extruded....... kg
7216.60.0000 Angles, shapes and sections, not further worked
than cold-formed or cold-finished................... kg
7216.90.0000 Other............................................... kg
7217 Wire of iron or nonalloy steel:
Containing by weight less than 0.25 percent of
carbon:
7217.11.0000 Not plated or coated, whether or not polished.... kg
7217.12.0000 Plated or coated with zinc....................... kg
7217.13.0000 Plated or coated with other base metals.......... kg
7217.19.0000 Other............................................ kg
Containing by weight 0.25 percent or more but less
than 0.6 percent of carbon:
7217.21.0000 Not plated or coated, whether or not polished.... kg
7217.22.0000 Plated or coated with zinc....................... kg
7217.23.0000 Plated or coated with other base metals.......... kg
7217.29.0000 Other............................................ kg
Containing by weight 0.6 percent or more of carbon:
7217.31.0000 Not plated or coated, whether or not polished.... kg
7217.32.0000 Plated or coated with zinc....................... kg
7217.33.0000 Plated or coated with other base metals.......... kg
7217.39.0000 Other............................................ kg
7218 Stainless steel in ingots or other primary forms;
semifinished products of stainless steel:
7218.10.0000 Ingots and other primary forms...................... kg
7218.90.0000 Other............................................... kg
7219 Flat-rolled products of stainless steel, of a width of
600 mm (23.6 inches) or more:
Not further worked than hot-rolled, in coils:
7219.11.0000 Of a thickness exceeding 10 mm (0.39 inch)....... kg
7219.12.0000 Of a thickness of 4.75 mm (0.187 inch) or more
but not exceeding 10 mm (0.39 inch).............. kg
7219.13.0000 Of a thickness of 3 mm (0.118 inch) or more but
less than 4.75 mm (0.187 inch)................... kg
7219.14.0000 Of a thickness of less than 3 mm (0.118 inch).... kg
Not further worked than hot-rolled, not in coils:
7219.21.0000 Of a thickness exceeding 10 mm (0.39 inch)....... kg
7219.22.0000 Of a thickness of 4.75 mm (0.187 inch) or more
but not exceeding 10 mm (0.39 inch).............. kg
7219.23.0000 Of a thickness of 3 mm (0.118 inch) or more but
less than 4.75 mm (0.187 inch)................... kg
7219.24.0000 Of a thickness of less than 3 mm (0.118 inch).... kg
Not further worked than cold-rolled (cold-reduced):
7219.31.0000 Of a thickness of 4.75 mm (0.187 inch) or more... kg
7219.32.0000 Of a thickness of 3 mm (0.118 inch) or more but
less than 4.75 mm (0.187 inch)................... kg
7219.33.0000 Of a thickness exceeding 1 mm (0.039 inch) but
less than 3 mm (0.118 inch)...................... kg
7219.34.0000 Of a thickness of 0.5 mm (0.02 inch) or more
but not exceeding 1 mm (0.039 inch).............. kg
7219.35.0000 Of a thickness of less than 0.5 mm (0.02 inch)... kg
7219.90.0000 Other............................................... kg
7220 Flat-rolled products of stainless steel, of a width of
less than 600 mm (23.6 inches):
Not further worked than hot-rolled:
7220.11.0000 Of a thickness of 4.75 mm (0.187 inch) or more... kg
7220.12.0000 Of a thickness of less than 4.75 mm (0.187 inch). kg
7220.20.0000 Not further worked than cold-rolled (cold-reduced).. kg
7220.90.0000 Other............................................... kg
7221.00.0000 Bars and rods, hot-rolled, in irregularly wound coils,
of stainless steel..................................... kg
7222 Other bars and rods of stainless steel; angles, shapes
and sections of stainless steel:
7222.10.0000 Bars and rods, not further worked than hot-rolled,
hot-drawn or extruded............................... kg
7222.20.0000 Bars and rods, not further worked than cold-formed
or cold-finished.................................... kg
7222.30.0000 Other bars and rods................................. kg
7222.40.0000 Angles, shapes and sections......................... kg
7223.00.0000 Wire of stainless steel................................ kg
7224 Other alloy steel in ingots or other primary forms;
semifinished products of other alloy steel:
7224.10.0000 Ingots and other primary forms...................... kg
7224.90.0000 Other............................................... kg
7225 Flat-rolled products of other alloy steel, of a width
of 600 mm (23.6 inches) or more:
7225.10.0000 Of silicon electrical steel......................... kg
7225.20.0000 Of high-speed steel................................. kg
7225.30.0000 Other, not further worked than hot-rolled, in coils. kg
7225.40.0000 Other, not further worked than hot-rolled, not in
coils............................................... kg
7225.50.0000 Other, not further worked than cold-rolled
(cold-reduced)...................................... kg
7225.90.0000 Other............................................... kg
7226 Flat-rolled products of other alloy steel, of a width
of less than 600 mm (23.6 inches):
7226.10.0000 Of silicon electrical steel......................... kg
7226.20.0000 Of high-speed steel................................. kg
Other:
7226.91.0000 Not further worked than hot-rolled............... kg
7226.92 Not further worked than cold-rolled (cold-
reduced:
7226.92.2000 Of tool steel (other than high-speed steel)... kg
7226.92.4000 Other......................................... kg
7226.99.0000 Other............................................ kg
7227 Bars and rods, hot-rolled, in irregularly wound coils,
of other alloy steel:
7227.10.0000 Of high-speed steel................................. kg
7227.20.0000 Of silico-manganese steel........................... kg
7227.90.0000 Other............................................... kg
7228 Other bars and rods of other alloy steel; angles,
shapes and sections, of other alloy steel; hollow
drill bars and rods, of alloy or nonalloy steel:
7228.10.0000 Bars and rods, of high-speed steel.................. kg
7228.20.0000 Bars and rods, of silico-manganese steel............ kg
7228.30 Other bars and rods, not further worked than
hot-rolled, hot-drawn or extruded:
7228.30.5000 Of tool steel (other than high-speed steel)...... kg
7228.30.8000 Other............................................ kg
7228.40.0000 Other bars and rods, not further worked than forged. kg
7228.50 Other bars and rods, not further worked than
cold-formed or cold-finished:
7228.50.1000 Of tool steel (other than high-speed steel)...... kg
7228.50.5000 Other............................................ kg
7228.60 Other bars and rods:
7228.60.1000 Of tool steel (other than high-speed steel)...... kg
7228.60.5000 Other............................................ kg
7228.70.0000 Angles, shapes and sections......................... kg
7228.80.0000 Hollow drill bars and rods.......................... kg
7229 Wire of other alloy steel:
7229.10.0000 Of high-speed steel................................. kg
7229.20.0000 Of silico-manganese steel........................... kg
7229.90.0000 Other............................................... kg
73
7301 Sheet piling of iron or steel, whether or not drilled,
punched or made from assembled elements; welded
angles, shapes and sections, of iron or steel:
7301.10.0000 Sheet piling........................................ kg
7301.20 Angles, shapes and sections:
7301.20.1000 Of iron or nonalloy steel........................ kg
7301.20.5000 Of alloy steel................................... kg
7302 Railway or tramway track construction material of iron
or steel, the following: rails, check-rails and rack
rails, switch blades, crossing frogs, point rods and
other crossing pieces, sleepers (cross-ties),
fish-plates, chairs, chair wedges, sole plates (base
plates), rail clips, bedplates, ties and other material
specialized for jointing or fixing rails:
7302.10 Rails:
Of iron or nonalloy steel:
New:
7302.10.1020 Standard tee rails, over 30 kg per meter
(60.48 pounds per yard).................... kg
7302.10.1030 Other...................................... kg
7302.10.1080 Used rails.................................... kg
7302.10.5000 Of alloy steel................................... kg
7302.20.0000 Sleepers (cross-ties)............................... kg
7302.30.0000 Switch blades, crossing frogs, point rods and other
crossing pieces..................................... kg
7302.40.0000 Fish-plates and sole plates......................... kg
7302.90.0000 Other............................................... kg
7303.00 Tubes, pipes and hollow profiles, of cast iron:
7303.00.0030 Soil pipe........................................... kg
7303.00.0060 Pressure pipe with an inside diameter of less than
356 mm (14 inches).................................. kg
7303.00.0090 Other............................................... kg
7304 Tubes, pipes and hollow profiles, seamless, of iron
(other than cast iron) or steel:
7304.10 Line pipe of a kind used for oil or gas pipelines:
Of iron or nonalloy steel:
7304.10.1020 Having an outside diameter not exceeding
114.3 mm (4.5 inches) ........................ kg
7304.10.1050 Having an outside diameter exceeding 114.3 mm
(4.5 inches) but not exceeding 406.4 mm
(16 inches) .................................. kg
7304.10.1080 Having an outside diameter exceeding 406.4 mm
(16 inches) .................................. kg
Of alloy steel:
7304.10.5020 Having an outside diameter not exceeding
114.3 mm (4.5 inches) ........................ kg
7304.10.5050 Having an outside diameter exceeding 114.3 mm
(4.5 inches) but not exceeding 406.4 mm
(16 inches) .................................. kg
7304.10.5080 Having an outside diameter exceeding 406.4 mm
(16 inches) .................................. kg
7304.20 Casing, tubing and drill pipe, of a kind used in
drilling for oil or gas:
Casing:
7304.20.1500 Of iron or nonalloy steel..................... kg
7304.20.3500 Of alloy steel................................ kg
Tubing:
7304.20.5000 Of iron or nonalloy steel..................... kg
7304.20.6000 Of alloy steel................................ kg
Drill pipe:
7304.20.7000 Of iron or nonalloy steel..................... kg
7304.20.8000 Of alloy steel................................ kg
Other, of circular cross section, of iron or
nonalloy steel:
7304.31.0000 Cold-drawn or cold-rolled (cold-reduced)......... kg
7304.39.0000 Other............................................ kg
Other, of circular cross section of stainless steel:
7304.41.0000 Cold-drawn or cold-rolled (cold reduced)......... kg
7304.49 Other:
7304.49.0010 Hollow bars................................... kg
7304.49.0040 Other......................................... kg
Other, of circular cross section of other alloy
steel:
7304.51.0000 Cold-drawn or cold-rolled (cold reduced)......... kg
7304.59.0000 Other............................................ kg
7304.90 Other:
7304.90.4000 Of iron or nonalloy steel........................ kg
7304.90.6000 Of alloy steel................................... kg
7305 Other tubes and pipes (for example, welded, riveted or
similarly closed), having internal and external
circular cross sections, the external diameter of
which exceeds 406.4 mm (16 inches) of iron or steel:
Line pipe of a kind used for oil or gas pipelines:
7305.11 Longitudinally submerged arc welded:
7305.11.1000 Of iron or nonalloy steel..................... kg
7305.11.5000 Of alloy steel................................ kg
7305.12 Other, longitudinally welded:
7305.12.1000 Of iron or nonalloy steel..................... kg
7305.12.5000 Of alloy steel................................ kg
7305.19 Other:
7305.19.1000 Of iron or nonalloy steel..................... kg
7305.19.5000 Of alloy steel................................ kg
7305.20 Casing of a kind used in drilling for oil or gas:
7305.20.3000 Of iron or nonalloy steel........................ kg
7305.20.7000 Of alloy steel................................... kg
Other, welded:
7305.31 Longitudinally welded:
7305.31.2000 Tapered pipes and tubes of steel principally
used as parts of illuminating articles........ kg
Other:
7305.31.4000 Of iron or nonalloy steel.................. kg
7305.31.6000 Of alloy steel............................. kg
7305.39 Other:
7305.39.1000 Of iron or nonalloy steel..................... kg
7305.39.5000 Of alloy steel................................ kg
7305.90 Other:
7305.90.1000 Of iron or nonalloy steel........................ kg
7305.90.5000 Of alloy steel................................... kg
7306 Other tubes, pipes and hollow profiles (for example,
open seamed or welded, riveted or similarly closed),
of iron or steel:
7306.10 Line pipe of a kind used for oil or gas pipelines:
7306.10.1000 Of iron or nonalloy steel........................ kg
7306.10.5000 Of alloy steel................................... kg
7306.20 Casing and tubing of a kind used in drilling for
oil or gas:
Casing:
7306.20.1500 Of iron or nonalloy steel..................... kg
7306.20.2500 Of alloy steel................................ kg
Tubing:
7306.20.6000 Of iron or nonalloy steel..................... kg
7306.20.8000 Of alloy steel................................ kg
7306.30 Other, welded, of circular cross section, of iron
or nonalloy steel:
7306.30.1000 Having a wall thickness of less than 1.65 mm
(0.065 inch)..................................... kg
Having a wall thickness of 1.65 mm (0.065 inch)
or more:
7306.30.1550 The following pipes and tubes: tapered,
principally used as parts of illuminating
articles; cold-drawn; cold-rolled with a wall
thickness not exceeding 2.54 mm (0.10 inch);
or suitable for use in boilers, superheaters,
or other gas or liquid pressure applications.. kg
Other:
With an outside diameter not exceeding
114.3 mm (4.5 inches):
7306.30.2000 Galvanized.............................. kg
7306.30.4000 Other................................... kg
7306.30.6000 With an outside diameter exceeding 114.3 mm
(4.5 inches) but not exceeding 406.4 mm
(16 inches)................................ kg
7306.40 Other, welded, of circular cross section, of
stainless steel:
7306.40.1000 Having a wall thickness of less than 1.65 mm
(0.065 inch)..................................... kg
7306.40.5000 Having a wall thickness of 1.65 mm (0.065 inch)
or more.......................................... kg
7306.50 Other, welded, of circular cross section, of other
alloy steel:
7306.50.1000 Having a wall thickness of less than 1.65 mm
(0.065 inch)..................................... kg
7306.50.4500 Having a wall thickness of 1.65 mm (0.065 inch)
or more.......................................... kg
7306.60 Other, welded, of non-circular cross section:
7306.60.2500 Of iron or nonalloy steel........................ kg
7306.60.6500 Of alloy steel................................... kg
7306.90 Other:
7306.90.1000 Of iron or nonalloy steel........................ kg
7306.90.5000 Of alloy steel................................... kg
7307 Tube or pipe fittings (for example couplings, elbows,
sleeves), of iron or steel:
Cast fittings:
7307.11 Of nonmalleable cast iron:
7307.11.0030 For threaded pipe............................. kg
Other:
7307.11.0045 For cast-iron soil pipe.................... kg
7307.11.0060 Other...................................... kg
7307.19 Other:
7307.19.3000 Ductile fittings.............................. kg
Other:
7307.19.9030 Unions..................................... kg
7307.19.9090 Other...................................... kg
Other, of stainless steel:
7307.21.0000 Flanges.......................................... kg
7307.22 Threaded elbows, bends and sleeves:
7307.22.1000 Sleeves (couplings)........................... kg
7307.22.5000 Other......................................... kg
7307.23.0000 Butt welding fittings............................ kg
7307.29.0000 Other............................................ kg
Other:
7307.91 Flanges:
7307.91.2000 Of iron or nonalloy steel..................... kg
7307.91.4000 Of alloy steel (except stainless)............. kg
7307.92 Threaded elbows, bends and sleeves:
Sleeves (couplings):
7307.92.3010 Of iron or nonalloy steel.................. kg
7307.92.3030 Of alloy steel (except stainless steel).... kg
7307.92.9000 Other......................................... kg
7307.93 Butt welding fittings:
7307.93.1000 Of iron or nonalloy steel..................... kg
7307.93.2000 Of alloy steel (except stainless steel)....... kg
7307.99 Other:
7307.99.2000 Of iron or nonalloy steel..................... kg
7307.99.4000 Of alloy steel (except stainless steel)....... kg
7308 Structures (excluding prefabricated buildings of
heading 9406) and parts of structures (for example,
bridges and bridge sections, lock gates, towers,
lattice masts, roofs, roofing frameworks, doors and
windows and their frames and thresholds for doors,
shutters, balustrades, pillars and columns), of iron
or steel; plates, rods, angles, shapes, sections,
tubes and the like, prepared for use in structures, of
iron or steel:
7308.10.0000 Bridges and bridge sections......................... kg
7308.20.0000 Towers and lattice masts............................ kg
7308.30.0000 Doors, windows and their frames and thresholds for
doors............................................... kg
7308.40.0000 Equipment for scaffolding, shuttering, propping or
pit-propping ....................................... kg
7308.90 Other:
7308.90.1000 Columns, pillars, posts, beams, girders and
similar structural units......................... kg
Other:
7308.90.9030 Sheet-metal roofing, siding, flooring, and
roof drainage equipment....................... kg
Other:
7308.90.9060 Architectural and ornamental work.......... kg
7308.90.9090 Other...................................... kg
7309.00 Reservoirs, tanks, vats and similar containers for any
material (other than compressed or liquefied gas), of
iron or steel, of a capacity exceeding 300 liters
(79.25 gallons), whether or not lined or heat insu-
lated, but not fitted with mechanical or thermal
equipment:
7309.00.0030 Tanks............................................... No.
7309.00.0090 Other............................................... No.
7310 Tanks, casks, drums, cans, boxes and similar
containers, for any material (other than compressed or
liquefied gas), of iron or steel, of a capacity not
exceeding 300 liters (79.25 gallons), whether or not
lined or heat insulated, but not fitted with
mechanical or thermal equipment:
7310.10 Of a capacity of 50 liters (13.21 gallons) or more:
7310.10.0010 Empty steel drums and barrels.................... No.
7310.10.0050 Other............................................ X
Of a capacity of less than 50 liters (13.21
gallons):
7310.21.0000 Cans which are to be closed by soldering or
crimping......................................... No.
7310.29.0000 Other............................................ No.
7311.00.0000 Containers for compressed or liquefied gas, of iron or
steel.................................................. No.
7312 Stranded wire, ropes, cables, plaited bands, slings
and the like, of iron or steel, not electrically
insulated:
7312.10 Stranded wire, ropes and cables:
Stranded wire:
7312.10.2500 Fitted with fittings or made up into
articles...................................... kg
Other:
7312.10.3015 For prestressing concrete.................. kg
7312.10.3500 Other...................................... kg
Ropes, cable, and cordage other than stranded
wire:
7312.10.5500 Fitted with fittings or made up into articles. kg
7312.10.8500 Other......................................... kg
7312.90.0000 Other............................................... kg
7313.00.0000 Barbed wire of iron or steel; twisted hoop or single
flat wire, barbed or not, and loosely twisted double
wire, of a kind used for fencing, of iron or steel..... kg
7314 Cloth (including endless bands), grill, netting and
fencing, of iron or steel wire; expanded metal of iron
or steel:
Woven products:
7314.11.0000 Of stainless steel............................... m2
7314.19.0000 Other............................................ m2
7314.20.0000 Grill, netting and fencing, welded at the inter-
section, of wire with a maximum cross-sectional
dimension of 3 mm (0.118 inch) or more and having a
mesh size of 100 cm2 (15.5 square inches) or more
(concrete reinforcement mesh)....................... kg
7314.30.0000 Other grill, netting and fencing, welded at the
intersection........................................ kg
Other grill, netting and fencing:
7314.41.0000 Plated or coated with zinc....................... kg
7314.42.0000 Coated with plastics ............................ kg
7314.49.0000 Other............................................ kg
7314.50.0000 Expanded metal...................................... m2
7315 Chain and parts thereof, of iron or steel:
Articulated link chain and parts thereof:
7315.11.0000 Roller chain..................................... kg
7315.12.0000 Other chain...................................... kg
7315.19.0000 Parts............................................ kg
7315.20.0000 Skid chain.......................................... kg
Other chain:
7315.81.0000 Stud link (or anchor)............................ kg
7315.82 Other, welded link:
7315.82.2000 Of alloy steel................................ kg
7315.82.6000 Of iron or nonalloy steel..................... kg
7315.89.0000 Other............................................ kg
7315.90.0000 Other parts......................................... kg
7316.00.0000 Anchors, grapnels and parts thereof, of iron or steel.. X
7317 Nails, tacks, drawing pins, corrugated nails, staples
(other than those of heading 8305) and similar
articles, of iron or steel, whether or not with heads
of other material, but excluding such articles with
heads of copper:
7317.00.1000 Thumb tacks......................................... kg
7317.00.9000 Other............................................... kg
7318 Screws, bolts, nuts, coach screws, screw hooks,
rivets, cotters, cotter pins, washers (including
spring washers) and similar articles, of iron or steel:
Threaded articles:
7318.11.0000 Coach screws..................................... kg
7318.12.0000 Other wood screws................................ kg
7318.13.0000 Screw hooks and screw rings...................... kg
7318.14.0000 Self-tapping screws.............................. kg
7318.15 Other screws and bolts, whether or not with
their nuts or washers:
7318.15.2000 Bolts and bolts and their nuts or washers
exported in the same shipment................. kg
7318.15.5000 Studs......................................... kg
7318.15.9000 Other......................................... kg
7318.16.0000 Nuts............................................. kg
7318.19.0000 Other............................................ kg
Nonthreaded articles:
7318.21.0000 Spring washers and other lock washers............ kg
7318.22.0000 Other washers.................................... kg
7318.23.0000 Rivets........................................... kg
7318.24.0000 Cotters and cotter pins.......................... kg
7318.29.0000 Other............................................ kg
7319 Sewing needles, knitting needles, bodkins, crochet
hooks, embroidery stilettos and similar articles for
use in the hand, of iron or steel; safety pins and
other pins of iron or steel, not elsewhere specified
or included:
7319.10.0000 Sewing, darning or embroidery needles............... X
7319.20.0000 Safety pins......................................... X
7319.30.0000 Other pins.......................................... X
7319.90.0000 Other............................................... X
7320 Springs and leaves for springs, of iron or steel:
7320.10.0000 Leaf springs and leaves therefor.................... kg
7320.20 Helical springs:
7320.20.1000 Suitable for motor vehicle suspension............ kg
7320.20.5000 Other............................................ kg
7320.90 Other:
7320.90.1000 Hairsprings (except those of 9114)............... kg
Other:
7320.90.5030 Of wire....................................... kg
7320.90.5060 Other......................................... kg
7321 Stoves, ranges, grates, cookers (including those with
subsidiary boilers for central heating), barbecues,
braziers, gas rings, plate warmers and similar
nonelectric domestic appliances, and parts thereof, of
iron or steel:
Cooking appliances and plate warmers:
7321.11 For gas fuel or for both gas and other fuels:
7321.11.1000 Portable...................................... No.
7321.11.5000 Other......................................... No.
7321.12.0000 For liquid fuel.................................. No.
7321.13 For solid fuel:
7321.13.0050 Portable...................................... No.
7321.13.0070 Other......................................... No.
Other appliances:
7321.81.0000 For gas fuel or for both gas and other fuels..... No.
7321.82.0000 For liquid fuel.................................. No.
7321.83.0000 For solid fuel................................... No.
7321.90 Parts:
7321.90.6050 For cooking appliances and plate warmers......... X
7321.90.6080 Other............................................ X
7322 Radiators for central heating, not electrically
heated, and parts thereof, of iron or steel; air
heaters and hot air distributors (including
distributors which can also distribute fresh or
conditioned air), not electrically heated,
incorporating a motor-driven fan or blower, and parts
thereof, of iron or steel:
Radiators and parts thereof:
7322.11.0000 Of cast iron..................................... X
7322.19.0000 Other............................................ X
7322.90.0000 Other, including parts.............................. X
7323 Table, kitchen or other household articles and parts
thereof, of iron or steel; iron or steel wool; pot
scourers and scouring or polishing pads, gloves and
the like, of iron or steel:
7323.10.0000 Iron or steel wool; pot scourers and scouring or
polishing pads, gloves and the like................. kg
Other:
7323.91.0000 Of cast iron, not enameled....................... X
7323.92.0000 Of cast iron, enameled........................... X
7323.93 Of stainless steel:
7323.93.0010 Cooking and kitchenware....................... No.
7323.93.0080 Other......................................... kg
7323.94.0000 Of iron (not cast iron) or steel, enameled ...... No.
7323.99.0000 Other............................................ X
7324 Sanitary ware and parts thereof, of iron or steel:
7324.10.0000 Sinks and wash basins, of stainless steel........... No.
Baths:
7324.21.0000 Of cast iron, whether or not enameled............ No.
7324.29.0000 Other............................................ No.
7324.90.0000 Other, including parts.............................. X
7325 Other cast articles of iron or steel:
7325.10.0000 Of nonmalleable cast iron........................... kg
Other:
7325.91.0000 Grinding balls and similar articles for mills.... kg
7325.99.0000 Other............................................ kg
7326 Other articles of iron or steel:
Forged or stamped, but not further worked:
7326.11.0000 Grinding balls and similar articles for mills.... kg
7326.19.0000 Other............................................ kg
7326.20.0000 Articles of iron or steel wire...................... X
7326.90 Other:
7326.90.1000 Articles of tinplate............................. X
Other:
7326.90.3500 Containers of a kind normally carried on the
person, in the pocket or in the handbag....... Doz.
Other:
7326.90.6000 Coated or plated with precious metal....... X
Other:
7326.90.9030 Hangers and similar supports for tubes
and pipes............................... kg
7326.90.9060 Ladders................................. No.
7326.90.9500 Other................................... kg
74
7401 Copper mattes; cement copper (precipitated copper):
7401.10.0000 Copper mattes........................copper content kg
7401.20.0000 Cement copper (precipitated copper)................. kg
7402.00.0000 Unrefined copper; copper anodes for electrolytic
refining................................copper content. kg
7403 Refined copper and copper alloys, unwrought (other
than master alloys of heading 7405):
Refined copper:
7403.11.0000 Cathodes and sections of cathodes................ kg
7403.12.0000 Wire bars........................................ kg
7403.13.0000 Billets.......................................... kg
7403.19.0000 Other............................................ kg
Copper alloys:
7403.21.0000 Copper-zinc base alloys (brass).................. kg
7403.22.0000 Copper-tin base alloys (bronze).................. kg
7403.23.0000 Copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver)... kg
7403.29.0000 Other copper alloys.............................. kg
7404 Copper waste and scrap:
7404.00.0020 Of refined copper................................... kg
Of copper alloys:
Of copper-zinc base alloys (brass):
7404.00.0045 Containing more than 0.3 percent lead ........ kg
7404.00.0062 Other......................................... kg
7404.00.0080 Other............................................ kg
7405.00.0000 Master alloys of copper................................ kg
7406 Copper powders and flakes:
7406.10.0000 Powders of non-lamellar structure................... kg
7406.20.0000 Powders of lamellar structure; flakes............... kg
7407 Copper bars, rods and profiles:
7407.10.0000 Of refined copper................................... kg
Of copper alloys:
7407.21.0000 Of copper-zinc base alloys (brass)............... kg
7407.22.0000 Of copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver)... kg
7407.29.0000 Other............................................ kg
7408 Copper wire:
Of refined copper:
Of which the maximum cross-sectional dimension
exceeds 6 mm (0.23 inch):
7408.11.3000 With a maximum cross-sectional dimension over
9.5 mm (0.37 inch)............................ kg
7408.11.6000 With a maximum cross-sectional dimension over
6 mm (.0.23 inch) but not over 9.5 mm (0.37
inch.......................................... kg
7408.19.0000 Other............................................ kg
Of copper alloys:
7408.21.0000 Of copper-zinc base alloys (brass)............... kg
7408.22.0000 Of copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver)... kg
7408.29.0000 Other............................................ kg
7409 Copper plates, sheets and strip, of a thickness
exceeding 0.15 mm (0.006 inch):
Of refined copper:
7409.11.0000 In coils......................................... kg
7409.19.0000 Other............................................ kg
Of copper-zinc base alloys (brass):
7409.21.0000 In coils......................................... kg
7409.29.0000 Other............................................ kg
Of copper-tin base alloys (bronze):
7409.31.0000 In coils......................................... kg
7409.39.0000 Other............................................ kg
7409.40.0000 Of copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver)...... kg
7409.90.0000 Of other copper alloys.............................. kg
7410 Copper foil (whether or not printed or backed with
paper, paperboard, plastics or similar backing
materials) of a thickness (excluding any backing) not
exceeding 0.15 mm (0.006 inch):
Not backed:
7410.11.0000 Of refined copper................................ kg
7410.12.0000 Of copper alloys................................. kg
Backed:
7410.21 Of refined copper:
7410.21.3000 Copper clad laminates......................... m2
7410.21.6000 Other......................................... kg
7410.22.0000 Of copper alloys................................. kg
7411 Copper tubes and pipes:
Of refined copper:
7411.10.1000 Seamless......................................... kg
7411.10.5000 Other............................................ kg
Of copper alloys:
7411.21 Of copper-zinc base alloys (brass):
7411.21.1000 Seamless...................................... kg
7411.21.5000 Other......................................... kg
7411.22.0000 Of copper-nickel base alloys (cupro-nickel) or
copper-nickel-zinc base alloys (nickel silver)... kg
7411.29 Other:
7411.29.1000 Seamless...................................... kg
7411.29.5000 Other......................................... kg
7412 Copper tube or pipe fittings (for example, couplings,
elbows, sleeves):
7412.10.0000 Of refined copper................................... kg
7412.20.0000 Of copper alloys.................................... kg
7413 Stranded wire, cables, plaited bands and the like,
including slings and similar articles, of copper,
not electrically insulated:
Not fitted with fittings and not made up into
articles:
7413.00.1000 Stranded wire.................................... kg
7413.00.5000 Other............................................ kg
7413.00.9000 Fitted with fittings or made up into articles....... kg
7414 Cloth (including endless bands), grill and netting, of
copper wire; expanded metal of copper:
7414.10.0000 Endless bands, for machinery........................ kg
7414.90.0000 Other............................................... kg
7415 Nails, tacks, drawing pins, staples (other than those
of heading 8305) and similar articles, of copper or of
iron or steel with heads of copper; screws, bolts,
nuts, screw hooks, rivets, cotters, cotter pins,
washers (including spring washers) and similar
articles, of copper:
7415.10.0000 Nails and tacks, drawing pins, staples and similar
articles............................................ kg
Other articles, not threaded:
7415.21.0000 Washers (including spring washers)............... kg
7415.29.0000 Other............................................ kg
Other threaded articles:
7415.31.0000 Screws for wood.................................. kg
7415.32.0000 Other screws; bolts and nuts..................... kg
7415.39.0000 Other............................................ kg
7416.00.0000 Copper springs......................................... kg
7417.00.0000 Cooking or heating apparatus of a kind used for
domestic purposes, non-electric, and parts thereof,
of copper.............................................. kg
7418 Table, kitchen or other household articles and parts
thereof, of copper; pot scourers and scouring or
polishing pads, gloves and the like, of copper;
sanitary ware and parts thereof, of copper:
7418.10.0000 Table, kitchen or other household articles and
parts thereof; pot scourers and scouring or
polishing pads, gloves and the like................. kg
7418.20.0000 Sanitary ware and parts thereof..................... kg
7419 Other articles of copper:
7419.10.0000 Chain and parts thereof............................. kg
Other:
7419.91 Cast, molded, stamped or forged, but not further
worked:
7419.91.0010 Brass plumbing goods, not elsewhere specified
or included................................... kg
7419.91.0050 Other......................................... kg
7419.99 Other:
7419.99.1500 Containers of a kind normally carried on the
person, in the pocket or in the handbag....... Doz.
7419.99.5010 Brass plumbing goods not elsewhere specified
or included................................... kg
7419.99.5500 Other......................................... kg
75
7501 Nickel mattes, nickel oxide sinters and other
intermediate products of nickel metallurgy:
7501.10.0000 Nickel mattes....................................... kg
7501.20.0000 Nickel oxide sinters and other intermediate
products of nickel metallurgy....................... kg
7502 Unwrought nickel:
7502.10.0000 Nickel, not alloyed................................. kg
7502.20.0000 Nickel alloys....................................... kg
7503.00.0000 Nickel waste and scrap................................. kg
7504.00 Nickel powders and flakes:
7504.00.0010 Powders............................................. kg
7504.00.0050 Flakes.............................................. kg
7505 Nickel bars, rods, profiles and wire:
Bars, rods and profiles:
7505.11.0000 Of nickel, not alloyed........................... kg
7505.12.0000 Of nickel alloys................................. kg
Wire:
7505.21.0000 Of nickel, not alloyed........................... kg
7505.22.0000 Of nickel alloys................................. kg
7506 Nickel plates, sheets, strip and foil:
7506.10 Of nickel, not alloyed:
7506.10.1500 Plates, sheets, and strip........................ kg
7506.10.5000 Foil............................................. kg
7506.20 Of nickel alloys:
7506.20.1500 Plates, sheets and strip......................... kg
7506.20.5000 Foil............................................. kg
7507 Nickel tubes, pipes and tube or pipe fittings (for
example, couplings, elbows, sleeves):
Tubes and pipes:
7507.11.0000 Of nickel, not alloyed........................... kg
7507.12.0000 Of nickel alloys................................. kg
7507.20.0000 Tube or pipe fittings............................... kg
7508.00.0000 Other articles of nickel............................... kg
76
7601 Unwrought aluminum:
7601.10.0000 Aluminum, not alloyed............................... kg
7601.20 Aluminum alloys:
7601.20.9030 Aluminum vanadium master alloy................... kg
Other:
7601.20.9045 Of uniform circular cross section throughout
its length, not in coils...................... kg
Other:
7601.20.9075 Remelt scrap ingot......................... kg
7601.20.9500 Other...................................... kg
7602.00 Aluminum waste and scrap:
7602.00.0030 Used beverage container scrap....................... kg
7602.00.0090 Other............................................... kg
7603 Aluminum powders and flakes:
7603.10.0000 Powders of nonlamellar structure.................... kg
7603.20.0000 Powders of lamellar structure; flakes............... kg
7604 Aluminum bars, rods and profiles:
7604.10 Of aluminum, not alloyed:
7604.10.1000 Profiles......................................... kg
Bars and rods:
Having a round cross section:
7604.10.3010 With an outside diameter of less than
10 mm (0.39 inch).......................... kg
7604.10.3050 With an outside diameter of 10 mm (0.39
inch) or more.............................. kg
Other:
7604.10.5030 With a maximum cross sectional dimension
of less than 10 mm (0.39 inch)............. kg
7604.10.5060 With a maximum cross sectional dimension
of 10 mm (0.39 inch) or more............... kg
Of aluminum alloys:
7604.21.0000 Hollow profiles.................................. kg
7604.29 Other:
7604.29.1000 Other profiles................................ kg
Bars and rods:
Having a round cross section:
7604.29.3010 With an outside diameter of less than
10 mm (0.39 inch)....................... kg
7604.29.3050 With an outside diameter of 10 mm
(0.39 inch) or more..................... kg
Other:
7604.29.5030 With a maximum cross sectional dimension
of less than 10 mm (0.39 inch).......... kg
7604.29.5060 With a maximum cross sectional dimension
of 10 mm (0.39 inch) or more............ kg
7605 Aluminum wire:
Of aluminum, not alloyed:
Of which the maximum cross-sectional dimension
exceeds 7 mm (0.276 inch):
7605.11.0030 Of which the maximum cross-sectional dimension
exceeds 9.5 mm (0.374 inch)................... kg
7605.11.0090 Other......................................... kg
7605.19.0000 Other............................................ kg
Of aluminum alloys:
Of which the maximum cross-sectional dimension
exceeds 7 mm (0.276 inch):
7605.21.0030 Of which the maximum cross-sectional dimension
exceeds 9.5 mm (0.374 inch)................... kg
7605.21.0090 Other......................................... kg
7605.29.0000 Other............................................ kg
7606 Aluminum plates, sheets and strip, of a thickness
exceeding 0.2 mm (0.0079 inch):
Rectangular (including square):
7606.11 Of aluminum, not alloyed:
Not clad:
7606.11.3030 More than 6.3 mm (0.248 inch) in thickness. kg
7606.11.3060 6.3 mm (0.248 inch) or less in thickness... kg
7606.11.6000 Clad.......................................... kg
7606.12 Of aluminum alloys:
Not clad:
7606.12.3030 More than 6.3 mm (0.248 inch) in thickness. kg
7606.12.3070 6.3 mm (0.248 inch) or less in thickness... kg
7606.12.6000 Clad.......................................... kg
Other:
7606.91 Of aluminum, not alloyed:
More than 6.3 mm (0.248 inch) in thickness:
7606.91.0010 Circles and discs.......................... kg
7606.91.0050 Other...................................... kg
6.3 mm (0.248 inch) or less in thickness:
7606.91.0070 Circles and discs.......................... kg
7606.91.0090 Other...................................... kg
7606.92 Of aluminum alloys:
More than 6.3 mm (0.248 inch) in thickness:
7606.92.0010 Circles and discs.......................... kg
7606.92.0050 Other...................................... kg
6.3 mm (0.248 inch) or less in thickness:
7606.92.0070 Circles and discs.......................... kg
7606.92.0090 Other...................................... kg
7607 Aluminum foil (whether or not printed or backed with
paper, paperboard, plastics or similar backing
materials) of a thickness (excluding any backing) not
exceeding 0.2 mm (0.0079 inch):
Not backed:
7607.11 Rolled but not further worked:
Of a thickness not exceeding 0.15 mm (0.0059
inch):
7607.11.3000 Of a thickness not exceeding 0.01 mm
(0.00039 inch)............................. kg
7607.11.6000 Of a thickness exceeding 0.01 mm (0.00039
inch)...................................... kg
7607.11.9000 Other......................................... kg
7607.19.0000 Other............................................ kg
7607.20.0000 Backed.............................................. kg
7608 Aluminum tubes and pipes:
7608.10 Of aluminum, not alloyed:
7608.10.0030 Seamless......................................... kg
7608.10.0090 Other............................................ kg
7608.20 Of aluminum alloys:
7608.20.0030 Seamless......................................... kg
7608.20.0090 Other............................................ kg
7609.00.0000 Aluminum tube or pipe fittings (for example,
couplings, elbows, sleeves)............................ kg
7610 Aluminum structures (excluding prefabricated buildings
of heading 9406) and parts of structures (for
example, bridges and bridge-sections, towers, lattice
masts, roofs, roofing frameworks, doors and windows
and their frames and thresholds for doors,
balustrades, pillars and columns); aluminum plates,
rods, profiles, tubes and the like, prepared for use
in structures:
7610.10.0000 Doors, windows and their frames and thresholds for
doors............................................... kg
7610.90 Other:
7610.90.0020 Sheet-metal roofing, siding, flooring, and roof
guttering and other drainage equipment........... kg
7610.90.0040 Architectural and ornamental work................ kg
7610.90.0050 Other............................................ kg
7611 Aluminum reservoirs, tanks, vats and similar
containers, for any material (other than compressed or
liquefied gas), of a capacity exceeding 300 liters
(79.3 gallons), whether or not lined or heat
insulated, but not fitted with mechanical or thermal
equipment:
7611.00.0030 Tanks............................................... No.
7611.00.0090 Other............................................... No.
7612 Aluminum casks, drums, cans, boxes and similar
containers (including rigid or collapsible tubular
containers), for any material (other than compressed
or liquefied gas), of a capacity not exceeding 300
liters (79.3 gallons), whether or not lined or
insulated, but not fitted with mechanical or thermal
equipment:
7612.10.0000 Collapsible tubular containers...................... No.
7612.90 Other:
7612.90.1030 Cans of a capacity not exceeding 355 ml (12 oz).. No.
7612.90.1060 Cans of a capacity exceeding 355 ml (12 oz.) but
less than 3.8 liters (1 gallon).................. No.
7612.90.9000 Other............................................ No.
7613.00.0000 Aluminum containers for compressed or liquefied gas.... No.
7614 Stranded wire, cables, plaited bands and the like,
including slings and similar articles of aluminum, not
electrically insulated:
7614.10.0000 With steel core..................................... kg
7614.90 Other:
7614.90.1000 Not fitted with fittings and not made up into
articles......................................... kg
7614.90.5000 Fitted with fittings, or made up into articles... kg
7615 Table, kitchen or other household articles and parts
thereof, of aluminum; pot scourers and scouring or
polishing pads, gloves and the like, of aluminum;
sanitary ware and parts thereof, of aluminum:
7615.10 Table, kitchen or other household articles and
parts thereof; pot scourers and scouring or
polishing pads, gloves and the like:
7615.10.2000 Cooking and kitchenware, cast.................... No.
7615.10.4000 Cooking and kitchenware, other................... No.
7615.10.9000 Other............................................ kg
7615.20.0000 Sanitary ware and parts thereof..................... kg
7616 Other articles of aluminum:
7616.10 Nails, tacks, staples (other than those of heading
8305), screws, bolts, nuts, screw hooks, rivets,
cotters, cotter-pins, washers and similar articles:
7616.10.1000 Nails, tacks, and staples........................ kg
7616.10.3000 Rivets........................................... kg
7616.10.5000 Cotters and cotter-pins.......................... kg
Other:
7616.10.6000 Threaded fasteners............................ kg
7616.10.8000 Other......................................... kg
7616.90 Other:
7616.90.0030 Ladders.......................................... No.
7616.90.0040 Venetian blinds and parts thereof................ X
7616.90.0050 Hangers and supports for pipes and tubes......... kg
7616.90.0060 Castings......................................... kg
7616.90.0070 Forgings......................................... kg
Other:
7616.90.0075 Articles of wire............................. kg
7616.90.0080 Other........................................ kg
78
7801 Unwrought lead:
7801.10.0000 Refined lead........................................ kg
Other:
7801.91.0000 Containing by weight antimony as the principal
other element.................................... kg
7801.99 Other:
7801.99.3000 Lead bullion.................................. kg
Other:
7801.99.9030 Alloys of lead............................. kg
7801.99.9050 Other...................................... kg
7802 Lead waste and scrap:
7802.00.0030 Obtained from lead-acid storage batteries........... kg
7802.00.0060 Other............................................... kg
7803.00.0000 Lead bars, rods, profiles and wire..................... kg
7804 Lead plates, sheets, strip and foil; lead powders and
flakes:
Plates, sheets, strip and foil:
7804.11.0000 Sheets, strip and foil of a thickness (excluding
any backing) not exceeding 0.2 mm (0.008 inch)... kg
7804.19.0000 Other............................................ kg
7804.20.0000 Powders and flakes.................................. kg
7805.00.0000 Lead tubes, pipes and tube or pipe fittings (for
example, couplings).................................... kg
7806.00.0000 Other articles of lead................................. kg
79
7901 Unwrought zinc:
Zinc, not alloyed:
7901.11.0000 Containing by weight 99.99 percent or more of
zinc............................................. kg
7901.12.0000 Containing by weight less than 99.99 percent of
zinc............................................. kg
7901.20.0000 Zinc alloys......................................... kg
7902.00.0000 Zinc waste and scrap................................... kg
7903 Zinc dust, powders and flakes:
7903.10.0000 Zinc dust........................................... kg
7903.90.0000 Other............................................... kg
7904.00.0000 Zinc bars, rods, profiles and wire..................... kg
7905.00.0000 Zinc plates, sheets, strip and foil.................... kg
7906.00.0000 Zinc tubes, pipes and tube or pipe fittings (for
example, couplings, elbows, sleeves)................... kg
7907 Other articles of zinc:
7907.10.0000 Gutters, roof capping, skylight frames and other
fabricated building components...................... kg
Other:
7907.90.3000 Articles of a type used for household, table or
kitchen use; toilet and sanitary wares; all the
foregoing and parts thereof of zinc.............. kg
7907.90.6000 Other............................................ kg
80
8001 Unwrought tin:
8001.10.0000 Tin, not alloyed.................................... kg
8001.20.0000 Tin alloys.......................................... kg
8002.00.0000 Tin waste and scrap.................................... kg
8003.00.0000 Tin bars, rods, profiles and wire...................... kg
8004.00.0000 Tin plates, sheets and strip, of a thickness exceeding
0.2 mm (0.008 inch).................................... kg
8005 Tin foil (whether or not printed or backed with paper,
paperboard, plastics or similar backing materials), of
a thickness (excluding any backing) not exceeding 0.2
mm (0.008 inch); tin powders and flakes:
8005.10.0000 Foil................................................ kg
8005.20.0000 Powders and flakes.................................. kg
8006.00.0000 Tin tubes, pipes and tube or pipe fittings (for
example, couplings, elbows, sleeves)................... kg
8007.00.0000 Other articles of tin.................................. X
81
8101 Tungsten (wolfram) and articles thereof, including
waste and scrap:
8101.10.0000 Powders............................................. kg
Other:
8101.91.0000 Unwrought tungsten, including bars and rods
obtained simply by sintering; waste and scrap.... kg
8101.92.0000 Bars and rods, other than those obtained simply
by sintering, profiles, plates, sheets, strip and
foil............................................. kg
8101.93.0000 Wire............................................. kg
8101.99.0000 Other............................................ kg
8102 Molybdenum and articles thereof, including waste and
scrap:
8102.10.0000 Powders............................................. kg
Other:
8102.91.0000 Unwrought molybdenum, including bars and rods
obtained simply by sintering; waste and scrap.... kg
8102.92.0000 Bars and rods, other than those obtained simply
by sintering; profiles, plates, sheets, strip and
foil............................................. kg
8102.93.0000 Wire............................................. kg
8102.99.0000 Other............................................ kg
8103 Tantalum and articles thereof, including waste and
scrap:
8103.10 Unwrought tantalum, including bars and rods
obtained simply by sintering; waste and scrap;
powders:
8103.10.3000 Waste and scrap.................................. kg
8103.10.6030 Powders.......................................... kg
8103.10.6090 Other............................................ kg
8103.90.0000 Other............................................... kg
8104 Magnesium and articles thereof, including waste and
scrap:
Unwrought magnesium:
8104.11.0000 Containing at least 99.8 percent by weight of
magnesium........................................ kg
8104.19.0000 Other............................................ kg
8104.20.0000 Waste and scrap..................................... kg
8104.30.0000 Raspings, turnings and granules, graded according
to size; powders.................................... kg
8104.90.0000 Other............................................... kg
8105 Cobalt mattes and other intermediate products of
cobalt metallurgy; cobalt and articles thereof,
including waste and scrap:
8105.10.0000 Cobalt mattes and other intermediate products of
cobalt metallurgy; unwrought cobalt; waste and
scrap; powders...................................... kg
8105.90.0000 Other............................................... kg
8106.00.0000 Bismuth and articles thereof, including waste and scrap kg
8107 Cadmium and articles thereof, including waste and
scrap:
8107.10.0000 Unwrought cadmium; waste and scrap; powders......... kg
8107.90.0000 Other............................................... kg
8108 Titanium and articles thereof, including waste and
scrap:
8108.10 Unwrought titanium; waste and scrap; powders:
8108.10.1000 Waste and scrap.................................. kg
8108.10.5010 Sponge........................................... kg
8108.10.5030 Ingots........................................... kg
8108.10.5045 Billets.......................................... kg
8108.10.5060 Blooms, sheet bars, and slabs.................... kg
8108.10.5075 Other............................................ kg
8108.90 Other:
8108.90.6030 Bars, rods, profiles and wire ................... kg
8108.90.8000 Other............................................ kg
8109 Zirconium and articles thereof, including waste and
scrap:
8109.10.0000 Unwrought zirconium; waste and scrap; powders....... kg
8109.90.0000 Other............................................... kg
8110.00.0000 Antimony and articles thereof, including waste and
scrap.................................................. kg
8111.00.0000 Manganese and articles thereof, including waste and
scrap.................................................. kg
8112 Beryllium, chromium, germanium, vanadium, gallium,
hafnium, indium, niobium (columbium), rhenium and
thallium, and articles of these metals, including
waste and scrap:
Beryllium:
8112.11 Unwrought; waste and scrap; powders:
8112.11.3000 Waste and scrap............................... kg
8112.11.6000 Other......................................... kg
8112.19.0000 Other............................................ kg
8112.20.0000 Chromium............................................ kg
8112.30.0000 Germanium........................................... kg
8112.40.0000 Vanadium............................................ kg
Other:
8112.91.0000 Unwrought; waste and scrap; powders.............. kg
8112.99.0000 Other............................................ kg
8113.00.0000 Cermets and articles thereof, including waste and scrap kg
82
8201 Handtools of the following kinds and base metal parts
thereof: spades, shovels, mattocks, picks, hoes, forks
and rakes; axes, bill hooks and similar hewing tools;
secateurs and pruners of any kind; scythes, sickles,
hay knives, hedge shears, timber wedges and other tools
of a kind used in agriculture, horticulture or
forestry:
8201.10.0000 Spades and shovels, and parts thereof............... X
8201.20.0000 Forks, and parts thereof............................ X
8201.30.0000 Mattocks, picks, hoes and rakes, and parts thereof.. X
8201.40.0000 Axes, bill hooks and similar hewing tools, and
parts thereof....................................... X
8201.50.0000 One-handed secateurs and similar one-handed pruners
and shears (including poultry shears), and parts
thereof ............................................ X
8201.60.0000 Hedge shears, two-handed pruning shears and similar
two-handed shears, and parts thereof................ X
8201.90.0000 Other handtools of a kind used in agriculture,
horticulture or forestry, and parts thereof......... X
8202 Handsaws, and metal parts thereof; blades for saws of
all kinds (including slitting, slotting or toothless
saw blades); and base metal parts thereof:
8202.10.0000 Handsaws, and parts (except blades) thereof......... X
8202.20 Bandsaw blades, and parts thereof:
8202.20.0030 Metal cutting blades............................. X
8202.20.0060 Other............................................ X
Circular saw blades (including slitting or slotting
saw blades), and parts thereof:
8202.31.0000 With working part of steel....................... X
8202.32.0000 With working part of other materials............. X
8202.40.0000 Chain saw blades (in lengths or cut to size), and
parts thereof....................................... X
Other saw blades, and parts thereof:
8202.91.0000 Straight saw blades, for working metal........... X
8202.99.0000 Other (including parts).......................... X
8203 Files, rasps, pliers (including cutting pliers),
pincers, tweezers, metal-cutting shears, pipe
cutters, bolt cutters, perforating punches and similar
hand tools; and base metal parts thereof:
8203.10.0000 Files, rasps, and similar tools..................... Doz.
8203.20 Pliers (including cutting pliers), pincers,
tweezers, and similar tools, and parts thereof:
8203.20.2000 Tweezers......................................... X
Other:
8203.20.5000 Pliers........................................ X
8203.20.6060 Other tools................................... X
8203.20.8000 Parts......................................... X
8203.30.0000 Metal-cutting shears and similar tools, and parts
thereof............................................. X
8203.40.0000 Pipe cutters, bolt cutters, perforating punches,
and similar tools, and parts thereof................ X
8204 Hand-operated spanners and wrenches (including torque
meter wrenches but not including tap wrenches); socket
wrenches, with or without handles, drives or
extensions; base metal parts thereof:
Hand-operated spanners and wrenches, and parts
thereof:
8204.11 Non-adjustable, and parts thereof:
8204.11.0030 Open-end, box, and combination open-end and
box wrenches.................................. No.
8204.11.0060 Other (including parts)....................... X
8204.12.0000 Adjustable, and parts thereof.................... X
8204.20.0000 Socket wrenches, with or without handles, drives
and extensions, and parts thereof................... X
8205 Handtools (including glass cutters) not elsewhere
specified or included; blow torches and similar
self-contained torches; vises, clamps and the like,
other than accessories for and parts of machine tools;
anvils; portable forges; hand- or pedal-operated
grinding wheels with frameworks; base metal parts
thereof:
8205.10.0000 Drilling, threading or tapping tools, and parts
thereof............................................. X
8205.20.0000 Hammers and sledge hammers, and parts thereof....... X
8205.30.0000 Planes, chisels, gouges and similar cutting tools
for working wood, and parts thereof................. X
8205.40.0000 Screwdrivers, and parts thereof..................... X
Other handtools (including glass cutters) and parts
thereof:
8205.51.0000 Household tools, and parts thereof............... X
8205.59 Other:
8205.59.1000 Pipe tools, and parts thereof................. X
8205.59.2000 Powder-actuated handtools, and parts thereof.. X
8205.59.9000 Other......................................... X
8205.60.0000 Blow torches and similar self-contained torches,
and parts thereof................................... X
8205.70 Vises, clamps and the like, and parts thereof:
8205.70.0010 Vises............................................ No.
8205.70.0090 Other (including parts).......................... X
8205.80.0000 Anvils; portable forges; hand- or pedal-operated
grinding wheels with frameworks; and parts thereof.. X
8205.90.0000 Sets of articles of two or more of the foregoing
subheadings......................................... Pcs.
8206.00.0000 Tools of two or more of the headings 8202 to 8205, put
up in sets for retail sale............................. Pcs.
8207 Interchangeable tools for handtools, whether or not
power-operated, or for machine-tools (for example, for
pressing, stamping, punching, tapping, threading,
drilling, boring, broaching, milling, turning or screw-
driving), including dies for drawing or extruding metal,
and rock drilling or earth boring tools; and base metal
parts thereof:
Rock drilling or earth boring tools, and parts
thereof:
8207.11.0000 With working part of sintered metal carbide or
cermets, and parts thereof....................... X
8207.12 With working part of other material, and parts
thereof:
8207.12.1000 Percussion rock drill bits.................... No.
8207.12.2000 Rotary rock drill bits, core bits and reamers. No.
8207.12.5000 Other, and parts thereof...................... X
8207.20.0000 Dies for drawing or extruding metal, and parts
thereof............................................. X
8207.30 Tools for pressing, stamping or punching, and parts
thereof:
8207.30.3000 Suitable for cutting metal, and parts thereof.... X
Not suitable for cutting metal, and parts there-
of:
8207.30.6030 Stamping dies, and parts thereof.............. X
8207.30.6060 Metal forming dies, including thread-rolling
dies, and parts thereof....................... X
8207.30.6075 Dies for cutting cloth, leather or paper...... No.
8207.30.6090 Other......................................... X
8207.40.0000 Tools for tapping or threading, and parts thereof... X
8207.50 Tools for drilling, other than for rock drilling,
and parts thereof:
With cutting part containing by weight over 0.2
percent of chromium, molybdenum, or tungsten or
over 0.1 percent of vanadium:
8207.50.2030 Masonry drills................................ X
Twist drills:
8207.50.2045 Brad point................................. No.
8207.50.2055 Other...................................... No.
Other:
8207.50.2070 For woodworking............................ No.
8207.50.2080 Other...................................... No.
Other:
Suitable for cutting metal, and parts
thereof:
8207.50.4030 Twist drills............................... No.
8207.50.4060 Other...................................... X
Other:
8207.50.6000 For handtools, and parts thereof........... X
8207.50.8000 Other...................................... X
8207.60 Tools for boring or broaching, and parts thereof:
8207.60.0030 Broaches......................................... No.
8207.60.0060 Other (including parts).......................... No.
8207.70 Tools for milling, and parts thereof:
8207.70.1000 End milling cutters.............................. X
8207.70.5000 Other (including parts).......................... X
8207.80.0000 Tools for turning................................... X
8207.90 Other interchangeable tools, and parts thereof:
8207.90.1500 Files and rasps, including rotary files and
rasps, and parts thereof......................... X
Other:
8207.90.7540 Router bits................................... X
8207.90.7550 Cutterheads for woodworking, with inter-
changeable tools.............................. X
8207.90.7570 Other......................................... X
8208 Knives and cutting blades, for machines or for
mechanical appliances, and base metal parts thereof:
8208.10.0000 For metal working, and parts thereof................ X
8208.20.0000 For wood working, and parts thereof................. X
8208.30.0000 For kitchen appliances or for machines used by the
food industry, and parts thereof.................... X
8208.40.0000 For agricultural, horticultural or forestry
machines, and parts thereof......................... X
8208.90.0000 Other (including parts)............................. X
Plates, sticks, tips and the like for tools, unmounted,
of sintered metal carbides or cermets:
8209.00.0030 Of sintered metal carbides.......................... kg
8209.00.0060 Of cermets.......................................... kg
8210.00.0000 Hand-operated mechanical appliances, weighing 10 kg
(22.05 pounds) or less, used in the preparation,
conditioning or serving of food or drink, and base
metal parts thereof.................................... X
8211 Knives with cutting blades, serrated or not (including
pruning knives), other than knives of heading 8208, and
blades and base metal parts thereof:
8211.10.0000 Sets of assorted articles........................... Pcs.
Other:
8211.91.0000 Table knives having fixed blades, and parts
thereof.......................................... X
8211.92.0000 Other knives having fixed blades, and parts
thereof.......................................... X
8211.93.0000 Knives having other than fixed blades, and parts
thereof (except blades).......................... No.
8211.94.0000 Blades........................................... No.
8212 Razors and razor blades (including razor blade blanks
in strips), and base metal parts thereof:
8212.10.0000 Razors.............................................. No.
8212.20.0000 Safety razor blades, including razor blade blanks
in strips........................................... No.
8212.90.0000 Other parts......................................... X
8213.00.0000 Scissors, tailors' shears and similar shears, and
blades and other base metal parts thereof.............. No.
8214 Other articles of cutlery (for example hair clippers,
butchers' or kitchen cleavers, chopping or mincing
knives, paper knives); manicure or pedicure sets and
instruments (including nail files); base metal
parts thereof:
8214.10.0000 Paper knives, letter openers, erasing knives,
pencil sharpeners (nonmechanical) and blades, and
parts thereof....................................... No.
8214.20.0000 Manicure or pedicure sets and instruments
(including nail files), and parts thereof........... X
8214.90.0000 Other............................................... No.
8215 Spoons, forks, ladles, skimmers, cake-servers, fish-
knives, butter-knives, sugar tongs and similar kitchen
or tableware; and base metal parts thereof:
8215.10.0000 Sets of assorted articles containing at least one
article plated with precious metal.................. Pcs.
8215.20.0000 Other sets of assorted articles..................... Pcs.
Other:
8215.91.0000 Plated with precious metal....................... X
8215.99.0000 Other............................................ X
83
8301 Padlocks and locks (key, combination or electrically
operated), of base metal; clasps and frames with
clasps, incorporating locks, of base metal; keys and
parts of any of the foregoing articles, of base metal:
8301.10.0000 Padlocks............................................ Doz.
8301.20.0000 Locks of a kind used for motor vehicles............. kg
8301.30.0000 Locks of a kind used for furniture.................. kg
8301.40 Other locks:
8301.40.3000 Luggage locks.................................... Doz.
Other:
8301.40.6030 Door locks, locksets and other locks suitable
for use with interior or exterior doors
(except garage, overhead or sliding doors).... kg
8301.40.6060 Other......................................... kg
8301.50.0000 Clasps and frames with clasps, incorporating locks.. kg
8301.60.0000 Parts............................................... kg
8301.70.0000 Keys presented separately........................... kg
8302 Base metal mountings, fittings and similar articles
suitable for furniture, doors, staircases, windows,
blinds, coachwork, saddlery, trunks, chests, caskets
or the like; base metal hat racks, hat-pegs, brackets
and similar fixtures; castors with mountings of base
metal; automatic door closers of base metal; and base
metal parts thereof:
8302.10 Hinges, and parts thereof:
8302.10.3000 Designed for motor vehicles, of iron, steel,
aluminum or zinc................................. kg
8302.10.4030 Suitable for interior and exterior doors (except
garage, overhead or sliding doors)............... kg
8302.10.4060 Suitable for furniture and cabinets.............. kg
8302.10.4090 Other............................................ kg
8302.20.0000 Castors, and parts thereof.......................... kg
8302.30.0000 Other mountings, fittings and similar articles
suitable for motor vehicles; and parts thereof...... kg
Other mountings, fittings and similar articles, and
parts thereof:
8302.41 Suitable for buildings:
8302.41.3000 Door closers (except automatic door closers),
and parts thereof............................. kg
Other:
8302.41.8035 Suitable for interior and exterior doors
(except garage, overhead or sliding doors). kg
8302.41.8055 For curtains, draperies and window shades.. kg
8302.41.8075 Other...................................... kg
8302.42.0000 Other, suitable for furniture.................... kg
8302.49 Other:
8302.49.4500 For railway vehicles, aircraft, vessels and
other vehicles (except motor vehicles) of
section XVII ................................. kg
8302.49.7500 Other ........................................ kg
8302.50.0000 Hat-racks, hat-pegs, brackets and similar fixtures,
and parts thereof................................... kg
8302.60.0000 Automatic door closers, and parts thereof........... kg
8303.00.0000 Armored or reinforced safes, strong-boxes and doors
and safe deposit lockers for strong-rooms, cash or
deed boxes and the like, and parts thereof, of base
metal.................................................. kg
8304.00.0000 Desk-top filing or card-index cabinets, paper trays,
paper rests, pen trays, office-stamp stands and
similar office or desk equipment and parts thereof, of
base metal, other than office furniture of heading
9403................................................... kg
8305 Fittings for looseleaf binders or files, letter clips,
letter corners, paper clips, indexing tags and similar
office articles, and parts thereof, of base metal;
staples in strips (for example, for offices,
upholstery, packaging), of base metal:
8305.10.0000 Fittings for looseleaf binders or files............. kg
8305.20.0000 Staples in strips................................... kg
8305.90.0000 Other, including parts.............................. kg
8306 Bells, gongs and the like, nonelectric, of base metal;
statuettes and other ornaments, of base metal;
photograph, picture or similar frames, of base metal;
mirrors of base metal; and base metal parts
thereof:
8306.10.0000 Bells, gongs, and the like, and parts thereof....... kg
Statuettes and other ornaments, and parts thereof:
8306.21.0000 Plated with precious metal, and parts thereof.... kg
8306.29.0000 Other............................................ kg
8306.30.0000 Photograph, picture or similar frames; mirrors; and
parts thereof....................................... kg
8307 Flexible tubing of base metal, with or without
fittings:
8307.10.0000 Of iron or steel.................................... kg
8307.90.0000 Of other base metal................................. kg
8308 Clasps, frames with clasps, buckles, buckle clasps,
hooks, eyes, eyelets and the like and parts thereof,
of base metal, of a kind used for clothing, footwear,
awnings, handbags, travel goods or other made up
articles; tubular or bifurcated rivets of base
metal; beads and spangles of base metal:
8308.10.0000 Hooks, eyes and eyelets............................. kg
8308.20.0000 Tubular or bifurcated rivets........................ kg
8308.90 Other, including parts:
8308.90.6000 Buckles and buckle clasps and parts thereof...... kg
8308.90.8000 Other............................................ kg
8309 Stoppers, caps and lids (including crown corks, screw
caps and pouring stoppers), capsules for bottles,
threaded bungs, bung covers, seals and other packing
accessories, and parts thereof, of base metal:
8309.10.0000 Crown corks (including crown seals and caps), and
parts thereof....................................... kg
8309.90.0000 Other............................................... kg
8310.00.0000 Sign plates, name plates, address plates and similar
plates, numbers, letters and other symbols, and parts
thereof, of base metal, excluding those of heading
9405................................................... kg
8311 Wire, rods, tubes, plates, electrodes and similar
products of base metal or of metal carbides, coated
or cored with flux material, of a kind used for
soldering, brazing, welding or deposition of metal or
of metal carbides; wire and rods, of agglomerated base
metal powder, used for metal spraying; base metal parts
thereof:
8311.10.0000 Coated electrodes of base metal, for electric
arc-welding......................................... kg
8311.20.0000 Cored wire of base metal, for electric arc-welding.. kg
Coated rods and cored wire, of base metal, for
soldering, brazing or welding by flame:
8311.30.3000 Lead-tin solders................................. kg
8311.30.6000 Other............................................ kg
8311.90.0000 Other, including parts.............................. kg